Do away with guess work while loading or launching your boat! The SeaSense Load Mate Trailer Depth Indicator has LED lights that illuminate in green when your trailer is at right depth for safe loading or launching. The fully waterproof LED array and impact-resistant visibility dome ensure long-lasting use.
·    Indicates when trailer is in proper depth for loading and launching
·    Waterproof LED array and impact-resistant visibility dome
·    Easy to install
This trailer depth indicator comes with an adjustable float switch that allows convenient use on any boat and trailer combination. This depth indicator is available as a complete kit or retro kit.
Features of LED Load Mate Trailer Depth Indicator
·    LED light turns from red to green when trailer is at proper depth
·    Adjustable float switch for use in any boat and trailer combination
·    Waterproof LED array
·    Impact-resistant high visibility dome
·    Easy to install
·    Available as retrofit model for use with existing guide-ons
·    Complete kit contains boat guides and retro light kit
Specifications
Manf. Part # 50080282
·    Kit type: Retro kit
·    Driver side light assembly with 16' marine tinned wiring
·    Passenger side light assembly with 9' marine tinned wiring
·    Mounting plate for float switch
·    Four self-tapping screws for mounting plate
·    Float switch assembly with white coiled wire out of float switch
·    3' marine tinned wiring
·    2 mounting screws
·    6 blue piggy back wire connectors
·    Two 6" pole secure bolts and nuts
·    Self-tapping screw
·    6 galvanized wire clips
·    Four 12" wire zip ties
·    Two 3-1/2" stripes x 8" Load Mate decals
Manf. Part # 50080281
·    Kit type: Complete kit
·    Driver side light assembly with 16' marine tinned wiring
·    Passenger side light assembly with 9' marine tinned wiring
·    Mounting plate for float switch
·    4 self-tapping screws for mounting plate
·    Float switch assembly with white coiled wire
·    3' marine tinned wiring
·    2 mounting screws
·    6 blue piggy back wire connectors
·    Two 6" pole secure bolts and nuts
·    Self-tapping screw for secure ground
·    6 galvanized wire clips
·    Four 12" wire zip ties
·    Two 3½" stripe x 8" Load Mate decals
·    Two 19.75" x 17.125" galvanized pole supports
·    Two sets of 3" x 4" u-bolts with mounting plates and hardware
·    Two 48" PVC light support poles
Manf. Part # 50080283
·    Type: Trailer depth indicator guide pole kit with no boat lights
·    Two 19.75" x 17.125" galvanized pole support
·    Two sets of 3" x 4" u-bolts with  mounting plates and hardware
·    Two 48" PVC light support poles
Manf. Part # 50080280
·    Type: Guide Pole Kit (no lights)
·    Two 19.75" x 17.125" galvanized pole supports
·    Two sets of 3" x 4" U-bolts with mounting plates and hardware
·    Two 48" PVC light support poles