Anchor & Dock - Fenders, Buoys, Dock Bumpers, Keel Protectors, Cleats, Marine Rope
The iBoats Experience
Boats for SaleBrowse thousands of constantly-updated listings and search by location, brand, and boat type See more...
AdviceConnect with our expansive community and tap into the knowledge base of the most dedicated boaters around. See more...
Shop ProductsBrowse and search for hundreds of thousands of boat parts, accessories, and supplies to suit your every need.
Anchor & Dock How-To's
Boat Docking Equipment – Securing My Boat While Docked
The following are some of the most commonly used equipments:
Anchor Winches & WindlassesThis equipment helps in lowering as well as hoisting the anchor from the water. By lowering the anchor, the boat is secured to the ocean or sea floor. The anchor is connected to the boat using a chain or rope. You can either go for the electric type which is powered by the boat’s battery or power unit, the manual, or the hydraulic type. When choosing, consider factors such as power demand, pulling as well as speed capacity.
Boat CoversA boat at the harbor will be susceptible to dirt, dust and also contact from people and creatures such as birds. Furthermore, it will be rained on constantly while the sun will be shining on it directly. Overtime, it will get dirty and also suffer from wear and tear. To reduce the negative effects you may need to consider using a boat cover. The covers come in different fabrics such as canvas or polyester. Some will cover the vessel partially while others will cover it completely.
FendersA fender is a type of bumper that is placed on the sides of the boat. It absorbs the shocks or impact that comes from hitting the quay, jetty or other vessels. This reduces the chances of damaging the boat’s body. The fenders are normally made from rubber since it has good shock absorption characteristics. Other materials used include heavy duty plastic, elastomer and also foam. When fixing a fender it’s necessarily to think of the boat’s dimension, dock, displacement and tides.
Buoy and Buoy MarkersThe buoy is essential boat docking equipment. This device comes in different forms and has a variety of uses. It comes as the floating type which drifts with the waves or the fixed type that is anchored to the ocean floor. The mooring buoy is used by boaters to tie their vessels while berthing. Buoy markers are used by fishermen to indicate where their pots for lobster, shrimp or crabs are located. Other types indicate a safe passage.
Dock LightsDock lights are used to illuminate the harbor. This is done when the sky is not clear especially in misty conditions or at night. The lights guide a vessel thus lessening the chances of the boat hitting the side wall or other vessels. They are mounted on the surface or lampposts. A good light should provide maximum lighting while using minimal power. The lighting fixtures comprise of LED (light emitting diodes), incandescent, or HID.
Mooring WhipsDuring strong winds or waves a docked boat can slam or crash against the wall. To stop the damage from happening, mooring whips are extremely useful. This is a type of elastic line that stop the boat from hitting the wall. It consists of rods made from fiberglass fastened to an aluminium base using cleats/fasteners. Besides securing the watercraft firmly, the mooring lines also absorb the impact of the moving boat.
Skeg GuardThe skeg is the lowest position of the inboard/outboard outdrive or outboard motor. The section that is the extended keel houses the rudder. There is usually a small gap between the boat's surface and the rudder. A kelp, rope or line can get entangled in the gap thus damaging the rudder or making it hard to maneuver the boat. To stop this from happening, a skeg protector can be installed.
Rub RailIf you own a boat made from fiberglass then the rub rail should feature as part of the boat docking equipment. Also known as the “bang rail”, this piece of rail protects your boat from damage caused by crashing against the dock pilings. It is made from aluminum or metal hence can endure the scratches, scraping, cuts, or dents that will be experienced during the off-season or when docked at the marina.
Keel ProtectorThe keel is the lowest point on the boat’s lower surface. It is the region that makes initial contact with water. However, it is also the point that comes into first contact with the rough concrete, abrasive sand, the mooring lines as well as grinding concrete. Frequent contact will eat into the paintwork and also the body of the boat which is undesirable. This is avoided by installing a piece of material or lining known as the keel guard.
Marine / Dock De-icerThe cold regions or the winter season brings lots of headaches to boaters. The ice forms around the dock piling hence pulling them upwards. Also, the ice may knock against the dock thus causing damage. This is best avoided by installing an in-water de-icer. This is a submersible 1/4 to 1HP motor than it suspended inside the water. It creates waves inside the water thus causing the water to move or flow continuously. This stops ice from forming.
Dock Floats, Shackles and LinesIn areas where the water levels fluctuate a lot, it’s beneficial to use dock floats. The floats work as well as the normal, dry deck but will endure the frequent changes. It entails joining several pieces of docks together. Another important piece of equipment includes shackles and lines that are used to harness the vessel against the dock or buoy.
Simply securing the boat at the dock isn’t enough. It is necessary to also minimize the movement of the boat on the water. This is most important in regions where the sea gets quite rough or where the docking spaces are limited. When searching for the apparatus, you may need to pay close attention to the quality. The boat docking equipment should be able to withstand the constant bumps and shocks. In addition, they should be built with material that can endure the elements, salt water, as well as frequent use. read less
How to Dock Your Boat
Video TranscriptionDocking your boat may seem daunting. But it doesn’t have to be. The key is to be organized, prepared and to take it slow and easy.
Begin your docking maneuver when you are a good distance from the dock. Move toward it slowly.
Next nudge the throttle into gear momentarily to make sure the boat is on course and the helm is turned the right way.
For better visibility, try this tip – Lift the captions chair to get a little higher.
It is a good idea to use fenders or bumpers when you are learning to dock.
Just before you pull into the dock, ask the crew members to put the fenders over the side. It’s an easy way to involve them in the process.
As you approach the dock, be aware of current and wind drift. They can put you off course. You can easily spot current by looking at the edges of the dock or pilings for tell-tale swirls. You’ll have to adjust your entry slightly into the current to compensate for it. Winds crossing your docking path can also be troublesome. You’ll have to steer slightly into them to get your boat to follow the right course into the slip.
When the boat is lined up correctly, nudge the boat as slowly as you can.
You may have to slip in and out of gear to get the correct speed. As you move into the slip use your throttle shifter as a break by putting it into reverse at idle speed.
Hold it until your forward momentum is stopped, then put it back into neutral and shut off the engine.
It’s always safest to secure the boat before you try to climb out. Accidents are more likely to happen when someone leaves or enters the boat while it’s untied.
With care and practice you’ll gain confidence and before you know it docking will be a skill that’s second nature to you.
For more information on docking, visit your local boat dealer or go to discoverboating.com.
Video TranscriptWelcome to the basic anchoring procedures video. If you haven’t already done so, I recommend prior to watching this video, visit our website and read the article – “Anchoring 101 what they don’t tell you”. That article provides a detailed explanation of many of the concepts you’re going to see demonstrated in this video; from anchorage selection to determining scope and swing radius and consideration for obstacles.
In this video we’ve already selected our anchorage and where motoring up to the anchor drop point at this time. In today’s scenario we in a Cove that is very long but narrow with water depths averaging 12 feet. The Cove does have a couple of areas that are wider, that will give us a little larger swing radius. We have chosen one of those and that will be our home for the night. Thunderstorms are in the forecast. I would like to have an 8 to 1 scope and with a water depth to 12 feet that would give me 100 foot of road out.
Our objective is to have the anchor set in the very center of this widened area as shown by the red square on the map. From past experience I know that using this plow style anchor it takes about 30 feet to get it to really dig in and set in the bottom. So based off that knowledge I’m going to overshoot the center of the Cove by about 30 feet, then I slowly lower the anchor to the bottom and begin to set the anchor. This should allow the anchor plenty of distance to really dig in and whenever the anchor does set, it should end up in the center of the Cove.
I’m single handing this and I’m also pulling a jet ski, so that kind of make things a little tough as well. I’ve got 30 feet of chain so once I run out I’ve got chain and I’ll know I’m on the bottom. Alright so now I’m on the bottom I’ve got to go take care of my jet ski for a moment. Now my jet ski is secure, I’ve got it where I run down the side of my boat. I’m going to start easing back. You don’t want to just dump all of your anchor road out, because if you do that this is going to pile up and there’s a good chance it might actually fowl the anchor. So you want to get the boat moving a litttle bit when you start letting out to your road.
Letting out more as I’m starting to drift back. Here is my 50 foot marker just going over. Depending on the weather you expect; waves, tides etc. that depends on how much road you’re going to want to let out. If you’re just anchoring for lunch you don’t need to let out, but maybe 3 times of what the depth of what the water is plus your bow height. If you’re going to spend the night and it’s not going to be; you’re going to spend a good bit of time and it’s not forecasted to be very stormy. There goes that 75 feet, then you’re going to let out maybe a 5 to 1 scope. In this little Cove I do have some storms that may come in this evening so I’m going to go ahead and get out about 100 feet which is about a 8 to 1 scope. So I’m going to set the anchor and then I’m going to ease on in on that.
There’s my 100 foot marker. A 100 foot will be on the bank here if you know how this is set. My anchor is not set it, I’ve just been letting out. Now the boat is taking some tension on it. It takes the tension on it and I’m going to ease back a little more to see if I can help it dig in. It grabs and holds the bottom, now I’m going to tie it off; the Samson post.
Okay I got the road tied off to the Samson post. At this point the anchor isn’t really doing much good. And if you’re going to just eat lunch or hangout for a little while that would’ve been fine. But for rough weather, windy conditions, for stuff like that you need to set the anchor.
You set it and once it does grab hold you need to actually let the anchor dig into the bottom. And that’s what I’m doing right now is making the anchor dig into the bottom. Got the camera up now where you can kind of get a better view. You can see the road getting more tension on it. More tension and she’ll swing around as we go here.
Now I have both engines in reverse but they are in idle. Now you can see the road stretching out there. Now once this happens and the boat stops swaying back on forth for rotating. The bow stops rotating a little bit, you can look at the bank and you can see that the boat is not moving backwards anymore. And that will tell you that your anchor is set, it has penetrated the bottom to hold the boat. Now in really rough weather you can actually add just a little bit of thrust, little power and make it dig in even deeper. So there you go, that is setting an anchor. read less
Docking Control and Future Concepts
The motor yacht sector has remained relatively resilient during this period of economic uncertainty. As a result, a lot of focus has been put into making these boats as easy to control as possible. New control pads are being developed. This single controller bring significantly enhanced aesthetics and a tactile feel to those boats with just a bow retrofitted. A neutral controller offers an incredibly simple way of controlling two thrusters simultaneously allowing bow control and stern control individually or complex docking situations and slewing to be handled easily and intuitively.
The multi-joystick controller adds thrust control to the system. Meaning every method of propulsion can be controlled from a single stick. This integrates an existing inboard or outboard engine and allows full control without the need for expensive thrust spectering technologies. A version of the system is already in prototype form and being tested on the water.
Finally, every smaller boat wants this type of control. Lewmar’s investment in rapid prototyping technology allows us to take a new smaller thruster propeller such as this from design to testing in less than 24 hours.
Save More when you Shop for Boat Anchor and Dock Products from iboats.com
There’s no need to miss out on water fun this weekend; iboats stocks more anchor and dock products ready to ship the day you order, with low shipping rates and inexpensive 2nd day air service. Save more money when shopping for boat fenders, dock cleats, dock lines, mooring whips and all your boat dock, anchor and mooring products. With iboats’ discounted prices and everyday deals, your dollar buys more so you can boat for less and boat more often.
Anchors and Winches for all Recreation-sized Boats
Find all your favorite quality brands of boat anchors at iboats.com, including popular Greenfield vinyl-coated anchors and anchor rode chains in colors to match your boat, plus SeaSense, Tie-Down Engineering, and 10 other popular brands. Choose the style of anchor that best suits your boating, be it fluke anchor, grappling anchor, river, claw or other anchor styles – and if you’re not sure, our experienced boating customer service team can help you. Add a Powerwinch or Trac Outdoors manual or electric anchor winch for effortless anchorage while you fish, swim or party from your boat.
Fenders, Hull Guards and Dock Bumpers Help Save Boats
Have you ever worried about scratching, scraping, or putting a dent in your boat while at the dock, next to another boat, or when beaching your boat? Save the worry and save your boat with boat hull and skeg protectors from KeelGuard and KeelShield. Choose from over a dozen different styles of boat fenders, cushions, and bumpers – with sizes, colors, and favorite NCAA team logos to match your boat, mascot and house divided. The best-selling Taylor Made brand Hull Gard vinyl fenders, Polyform Guardian fenders, and Kwik Tek Hull Hugr flat fenders to name just a few, are always ready to ship same day and at the guaranteed best price. Replace worn boat rub rail with the largest selection of rub rail profiles from Taco Metals.
How to do a Boat Dock the Right Way
Boats and docks don’t play well together, but with the right dock products installed you can safely and securely moor your boat, enjoy great dock parties, and safely board and disembark your boat. At iboats.com find economical dock ladders, boat ladders and boat steps and the highest quality, made in USA dock and boat ladders from Garelick Manufacturing, plus many more. Dockside products are easy to install and maintain. Choose dock side bumpers, corner bumpers, post bumpers, piling caps, dock floats, and dock boxes – everything to protect your boat from your dock and secure your gear. Include dock cleats and boat cleats plus all sizes and styles of dock line to secure your boat. Add dock lighting too for safety and enjoyment. And if ice is a concern during winter, choose de-icers from Kasco, Powerhouse, or Taylor Made.
More Choices and Better Prices at iboats.com
With the largest selection of boat anchor and dock products at iboats.com, you can find the highest quality boating supplies at the best value. Installation instructions come with every product, and as always iboats’ knowledgeable customer service team, backed by the trust and support of our manufacturers, are here to answer your questions and advise you on the best anchor and dock products for your needs. Shop for boat dock and boat anchor gear at iboats.com and save more