Boats for Sale
Advice
CMC Electric Hydraulic Power Tilt And Trim
View Larger Photos
Enhance the performance of your outboard with the CMC Electric Hydraulic Power Tilt and Trim. It features 6061 T6 extruded aluminum construction and comes with stainless steel fasteners to assure solid and durable use round the year. This tilt and trim allows you to easily tuck-in and alter the angle of outboard motor to improve its performance in any load or water condition. Plus, you can quickly raise the motor to protect it from damage with just a push of a switch. This trim and tilt has long set back that improves boat stability. Its waterproof marine electric hydraulic actuator is rated at 7853 lbs.
- Made of 100% non-ferrous material – suitable for use in freshwater and salt water
- 7853 lbs rated electric hydraulic actuator
- Easy to tuck in, alter or raise the motor
This electric hydraulic power tilt and trim comes with or without gauge. It is available in two sizes for use with different outboards.
Features of CMC Electric Hydraulic Power Tilt and Trim:
- Enhances boat’s stability
- Increases top end speed
- Offers better prop clearance
- Reduces fuel consumption
- 6061 T6 extruded aluminum construction with stainless steel fasteners
- 100% non-ferrous material
- Allows easily tuck-in or alter angle of motor
- Allows raising motor with a simple push of switch
- Electric hydraulic actuator rated at 7853 lbs. of thrust
- Totally sealed submersible hydraulic system runs without water damage
- Standard B.I.A. bolt hole pattern (13001 & 13002)
- Convenient adapter kit available for clamp-on motors (13001 & 13002)
- Includes four stainless steel motor mounting bolts
- PT-35 accommodates clamp-on or bolt-on motors without the need of an adapter (5210)
Specifications:
Manf. Part # 13001
- Type: Electric hydraulic power tilt and trim PT-130 with gauge
- Set back: 6"
- Application: 130 H.P. and smaller motors
- Trim angle: 20°
- Total tilt and trim: 90°
Manf. Part # 13002
- Type: Electric hydraulic power tilt and trim PT-130 without gauge
- Set back: 6"
- Application: 130 H.P. and smaller motors
- Trim angle: 20°
- Total tilt and trim: 90°
Manf. Part # 52100
- Type: Electric hydraulic power tilt and trim PT-35
- Set back: 51/2"
- Application: 35 horse power and smaller motors
- Total tilt and trim: 84°
- Weight: 24 lbs
Manf. Part # 13022
- Type: Electric hydraulic power tilt and trim transom adapter for clamp motor
- For use with PT-130 / THT-130C
- To install small motors with transom clamps
Average Customer Review for Electric Hydraulic Power Tilt And Trim PT-130 with Gauge - CMC
Average Customer Review for Electric Hydraulic Power Tilt And Trim PT-130 without Gauge - CMC
Average Customer Review for Electric Hydraulic Power Tilt And Trim PT-35 - CMC
Average Customer Review for Electric Hydraulic Power Tilt And Trim Transom Adapter, for Clamp Motor - CMC
Q:
What is the advantage of geting the Gauge?
A:
You can have a gauge that tells you the up and down level of the tilt.
Q:
What is the switch control unit..is it dash mount or mountable by the steering colum?
A:
It is just a three wire toggle switch, they say you can just mount it right there with your instrument cluster.
Q:
I have a 30 Yamaha 3 cyl that is a clamp on motor. Will I need to purchase the "clamp on adapter kit" for my motor to work on this unit?
A:
Yes you will need to get that adapter to mount your clamp on motor, part number 13022.
Q:
Will this work for a 1973 Johnson 85esl73m?
A:
Yes it works on most outboards up to 130 HP.
Q:
I have an ETEC 40hp Model # E40DRLSDA, will this unit work for my outboard?
A:
Yes. It is rated for outboards that are 130hp or smaller.
Q:
I have an ETEC 40hp Model # E40DRLSDA that is the clamp on type what adapter plate is required??
A:
You need part number 13022. It is for installation of motors mounted with transom clamps. It works with the CMC PT-130 tilt and trim.
Q:
Will this work for a Yamaha 4 stroke 20 hp?
A:
This will work for any engine application up to 130 horsepower, so it should work well for your 20 horsepower Yamaha.
Q:
Is this the right unit for a 2005 Yamaha 25hp 4 stroke or the PT-35? My motor is currently bolted to the transom. Will I need an adaptor?
A:
You will need the PT-130 for Yamaha 4-stroke. You will not need any adapters of any kind, it is provided for clamp-on motors if that's what you have. Other than that it just bolts on.
Q:
What kind of wiring harness comes with this unit?
A:
It is a 16" wiring, includes 2 80amp relays, a 40 amp circuit breaker and a 5 amp inline fuse.
Q:
Will I have to worrie about my steering cables being long enough and can I still run my Finn on the motor or do I remove it I have a 85 HP?
A:
The only thing you will need to be aware of for the steering cables is there will be a 6 inch set back. By fin, I think you are speaking of the hydro-foil, you can keep that on as well.
Q:
Will this work on adpt. from 40hp to 20hp 4stroke?
A:
It's for use with the PT-130 / THT-130C for installation of smaller motors mounted with transom clamps.
Q:
So is there anything out there for a 50hp?
A:
Yes CMC offers another one up to 130 HP. 13001 is the part number for that.
Q:
I have a 9.9 yamaha 2 stroke kicker 1990's will this be suffice for the pt 35?
A:
Yes.
Q:
Compare this unit to panther integral model 25?
A:
Panther is designed for certain 2-stroke Johnson/Evinrude engines only. The PT-35 can accommodate more outboards. For more info give us a call at 1-800-914-1123.
Q:
IS EVERYTHING INCLUDED WITH THIS KIT?
A:
Refer to the Description tab to see what is all included with this product.
Q:
What is the Warranty on this?
A:
Frame structure is 5 year and hydraulic actuator mechanism is 1 year.
Q:
Will the PT-35 accomodate an Evinrude E-Tec 40 horsepower tiller model?
A:
According to our files, this will not work for anything larger than 35 horsepower.
Q:
Will this unit work with a 4stroke 30 HP Suzuki?
A:
According to CMC this should work for your application. Only certain 4-stroke Yamaha's will not accommodate PT-35.
Q:
What is the maximum weight motor weight?
A:
It generally will only fit up to 35 horsepower, and certain 4-stroke engines may not fit with this product. You will have to check to see if your unit has clamps and thumb screws. Certain engines will require the PT-130 instead.
Q:
So how do I know what motor and what will fit your product. Do you have a chart.?
A:
It really comes down to the horsepower, primarily. Also, if it is a Yamaha 4-stroke or any engine similar to that, it will not fit. We have just been informed by CMC that it will only work with 2-stroke engines that go up to 35 horsepower.
Q:
How do I find the trim motor that matches your product.???
A:
If you have an engine that is 35 horsepower or less and is a 2-stroke, this should work for you. If you have anything larger than that, you will want to consider the PT-130. We have this available with or without the gauge, part numbers 13001 or 13002.
Q:
Where is the acctuator switch? Can it be moved?
A:
Yes, it can be moved, you can mount it where ever you want, most mount it by their controls.
Q:
I have a 20hp tohatsu 4 stroke, will the PT 35 work and adapt to my current motor or will I need an adaptor.?
A:
No need for an adaptor, should mount with the industry standard BIA pattern.
Q:
Can this be wired into the tilt and trim button on my control handle?
A:
This can be wired to your tilt and trim button on your control handle as long as you have a 3 wire switch.
Q:
What models does this work for? Johnson? 1977 85HP?
A:
This will work for any engine between 65 and 130 horsepower.
Q:
I do a lot of towing with my 17 ft 1987 Sea Nymp with 50 hp Mariner. Will this unit put extra stress on the transom due to the extension from the transom especially when tilted during towing?
A:
It is entirely possible. For more information in this area, feel free to call us at (800)-914-1123.
Q:
Can anyone verify that this unit WILL NOT automatically lower when power is applied to the throttle. My current Mercury has a "safety feature" that lowers the tilt to the upper trim limit @ anything over 1500 rpm. It's not a powered lowering, just a pressure release within the cylinder.t"?
A:
CMC confirms that this will not automatically lower when power is applied to the throttle.
Q:
Does this unit have the trim buttons to place on throttle control handle. or mounting box etc ?
A:
CMC confirms you can wire the 3 wires into any 3 terminal switch. So as long as your switch in the throttle is 3 terminals, it will work.
Q:
Will this hold up a mariner 115 hp and hold trim on pontoon 21'?
A:
Yes it will hold your motor. It holds up to 130 HP engines.
Q:
Will this work on a 1986 50hp mercury?
A:
Yes this will work as it takes standard B.I.A bolt hole patterns.
Q:
I have an older 55 hp application for the restoration of an older run-about glass boat. It is built for a short shafted motor install. I have a great long shafted 55 HP Johnson that I would to use instead. Does the PT 130 come with multiple B.I.A patterns that will allow this transformer, and is there a web site place that I can research your multiple bolt patterns to be more certain that I can bolt this long shaft motor to this short shaft boat before I buy one only to find out I have no chance that it will work? My e-mail address is larcher@neo.rr.com?
A:
It only comes with the standard BIA pattern which has been in effect for many years. So it only comes in one. We can send the specs of the BIA hole pattern, but you you will need to contact us at the number at the top of the page.
Q:
Will this work with a mercury 9.9 4st bigfoot?
A:
The PT-35 would be a better fit as it is made for smaller outboards up to 35 HP. http://www.iboats.com/Electric-Hydraulic-Power-Tilt-And-Trim-PT-35-CMC/dm/view_id.392343
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
