This product is currently out of stock. As inventories are updated it will again be available for purchase.
CMC
Price: $886.67
(Out of stock)
Save: $183.32
(17% Off $1,069.99)
Part # 65002
(Out Of Stock)
Price: $1,013.76
(Out of stock)
Save: $176.23
(14% Off $1,189.99)
Part # 61002
No Reviews
(Out Of Stock)
  • This unique outboard motor hydraulic lifting device works independently of your power tilt and trim to allow the boat-motor-prop combination to work at its maximum efficiency.
  • The CMC hydraulic Power-Lift gives you the ability to adjust your motor down, while underway at full speed, for better out-of-hole shots or up for more top end speed and more prop clearance in shallow water.
  • Ideal for ski, bass or work boats.
  • With the flick of a switch, the CMC Power-Lift makes it easy to find the optimum height for any condition.
  • The Power-Lift is designed to fit V-6 and smaller outboard motors without drilling holes or making modifications in the boat or motor.
  • Provides 5" of travel and choose between 5-1/2" and 10" setback.
  • No short cuts are taken at CMC so you can be sure you will get the best transom jack for your money.
  • Computer aided design and precision machining of the Power-Lift is totally done at our facility.
  • The Power-Lift has no welded parts or aluminum castings to break.
  • The CMC Power-Lift is constructed of 1/2" 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability.
  • The Power-Lift utilizes a marine hydraulic power unit operated by 12 volt DC and is totally waterproof.
  • The motor bracket moves up and down on a transom bracket by use of rollers machined from aluminum-bronze alloy.
  • These rollers are highly impact resistant, corrosive resistant and have a high load carrying capacity.
  • Thrust is eliminated by the stainless steel pin through this roller with a space age self-lubricating non-metallic material (G.S.M. nylatron) used for thrust guides on either side of the rollers.
  • NO GAUGE.
  • PL-65 Electric Hydraulic Transom Jack without Gauge and 5 1/2" Setback - CMC
    PL-65 Electric Hydraulic Transom Jack without Gauge and 5 1/2" Setback - CMC

      Improved Performance For All Outboards
    • The Power-Lift can improve the performance of virtually any type outboard
    • This unique outboard motor hydraulic lifting device works independently of your power trim and tilt to allow the boat-motor-prop combination to work at it's maximum efficiency
    • The Power-Lift gives you the ability to adjust your motor down, for better out of the hole shots or up for better top end speed, better fuel efficiency, and more prop clearance in shallow water
    • With the touch of a switch the Power-Lift makes it easy to find that optimum height for any condition while underway at full speed! Ideal for ski, bass, or work boats
    • In order for your outboard to perform at its full potential and efficiency, it should be adjusted to different heights at different speeds, water conditions and loads in your boat
    • The Power-Lift will set your motor back away from the transom 5 1/2 inches which allows the prop to run in "cleaner" water giving the prop a better "bite" and eliminating prop slippage
    • The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater use

    PL-65 Electric Hydraulic Transom Jack without Gauge and 10" Setback - CMC
    PL-65 Electric Hydraulic Transom Jack without Gauge and 10" Setback - CMC

      Improved Performance For All Outboards
    • The Power-Lift can improve the performance of virtually any type outboard
    • This unique outboard motor hydraulic lifting device works independently of your power trim and tilt to allow the boat-motor-prop combination to work at it's maximum efficiency
    • The Power-Lift gives you the ability to adjust your motor down, for better out of the hole shots or up for better top end speed, better fuel efficiency, and more prop clearance in shallow water
    • With the touch of a switch the Power-Lift makes it easy to find that optimum height for any condition while underway at full speed! Ideal for ski, bass, or work boats
    • In order for your outboard to perform at its full potential and efficiency, it should be adjusted to different heights at different speeds, water conditions and loads in your boat
    • The Power-Lift will set your motor back away from the transom 10 inches which allows the prop to run in "cleaner" water giving the prop a better "bite" and eliminating prop slippage
    • The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater use

    Q:
    Will this fit yamaha 115 four 2017?
    A:
    Yes this can handle your outboard. With this you will have no problem lifting a V6 300 HP.


    Q:
    Hello. where can i Buy the platic washers for the side of this power lift? I need to replace them on my jack plate Thank You David?
    A:
    We do not currently carry these washers on our website. We suggest posting a question on our Forum page for further assistance: http://forusm.iboats.com/


    Q:
    WHERE CAN I GET A WIRING HARNESS FOR A JACKPLATE.? IT COMES OUT OF THE TOP OF THE MOTOR.?
    A:
    A replacement wiring harness for this unit you would have to refer to your manual to get a part number. Then you can contact us at the number at the top of the page and we can look into a special order.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies