This product has been discontinued.
Sierra
Carburetor Kit - 18-7070 - Sierra
Price: $20.44
Discontinued
Save: $11.35
(35% Off $31.79)
Part # 18-7070
(Discontinued)
Replaces OEM part #
  • MERCURY MARINE 823427A1
  • MERCURY MARINE 1397-8872
  • MERCURY MARINE 1397-7543
  • MERCURY MARINE 1397-7542
  • MERCURY MARINE 1397-3464
  • MERCURY MARINE 1397-2637
  • MERCURY MARINE 1397-2072
  • OMC 383615
  • OMC 982384
6 Cyl., Model or Engine 198(3.3L), 225(3.7L)E, Carb Type and Model R-2, 2GC, Carb. No. 7023081, 7025181
Average Customer Review for Carburetor Kit - 18-7070 - Sierra
Full StarFull StarFull StarFull StarEmpty Star
Based On 6 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Worked Great
by Warren from Alexandria, Virginia on June 24, 2015
Product worked perfect for my 1988 Bayliner 3.0l omc
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Exactly what I needed
by Tim from Antario, California on April 29, 2013
I was having difficulty finding what I needed because this was an older model however, you guys helped me get exactly what I needed and at a great price. Also, I received it way before I thought I would. Thanks!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb kit
by Gerald from Thunder Bay, Ontario on June 17, 2012
everything fit perfect
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked Great!
by Dave from Greenwood, Indiana on April 23, 2012
This product worked great, I had no problems with the parts.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Buyer
by Kenneth from Loveland, Ohio on July 19, 2011
Totally satisfied
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Review for Sierra 18-7070 Carb Kit
by a Customer on June 22, 2009
The seat for the needle valve in this kit was oblong and completely useless. After installing the kit i noticed the motor ran rich at idle and would be flooded after sitting for a few min with the motor turned off...this was not a problem i had before the kit...i thought the float was set incorrectly but it was not...i checked for correct gaskets but upon taking the seat out to make sure i put a gasket in i found that that hole in the seat was oblong and letting gas in...replaced with old seat and problem went away...boat runs good now....i think the company should have checked the kit before sending it out....thanks.
(21 of 25 people found this review helpful)
Was this review helpful?
Q:
1993 3.0 mercruiser carb. Number 1539GA-4 what kit do I need?
A:
We do not pull up that carb number. Check if there are any other numbers on the carb. Should be a number like 806078A2 or something along those lines.


Q:
Will this fit rochester 1351 6065 a1 engine s/n 4470300 mercrusier?
A:
We do not pull up that part number from Mercury nor do we pull up that serial number. We will need to know the model engine you have with that serial number so we can look up serial range.


Q:
1977 MERCRUISER, 140HP SER 4515964, OUTDRIVE, 4628214, CARB 1351-5203A1 ROCHESTER, 7043184, NEED CARB KIT AND FLOAT,?
A:
You need 18-7746 and is what we offer.


Q:
Need kit for Rochester 4MV 4bbl boat serial?
A:
We will need to know motor information along with model/serial number to find correct kit.


Q:
What carb kit fits a 1986 mercruiser 140 carb# 1389-9350?
A:
To look up the correct part the engine serial number is required.


Q:
Carb tag is 1336-3594A1 Mercury, what carburetor kit is correct for it?
A:
They don't make an aftermarket for that specific part number. I would need the serial number of the Mercury to find any further information on the carb kit.


Q:
Does this kit fit Rochester quadrajet #17080561 ?
A:
We would need make, model, etc. to cross reference OEM number. If you need some assistance call us at 1-800-914-1123. We should have a kit, but can only confirm through that route.


Q:
Does this fit carb # 807312?
A:
No it does not fit that carb model.


Q:
My boat is a 1996 mercuriser 5.7 with a two bbl what kit doses it take07312 5902?
A:
We would need to know serial number and carb model you have. Whether it be Mercarb, Weber, etc. Call us at the number at the top of the page and we can assist you further.


Q:
Hi. My caburetor, shoo the number 1389-9562 it on 3.0l mercrusier, is good is kit. Thanks?
A:
You should need 18-7097, this one will not work.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies