This product has been discontinued.
CMC
Electric Hydraulic Power Tilt And Trim PT-35 - CMC
Price: $852.11
Discontinued
Save: $37.88
(4% Off $889.99)
Part # 52100
(Discontinued)
This item is found in the following Product Families
  • Rated for most 35hp and smaller motors.
  • 5 1/2" set back to enhance boat stability and performance.
  • 84 degree of trim and tilt.
  • 1/4" 6061 T6 extruded aluminum construction with stainless steel fastners.
  • Electric hydraulic actuator rated at 7,853 lbs of thrust.
  • Accommodates clamp-on or bolt on motors without the need of an adapter.
  • Weighs only 24 pounds.
  • Mounting bolts are NOT included with this model.
  • Full StarFull StarFull StarFull StarHalf Star
    Based On 13 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    CMC tilt and trim
    by Lettie from Holly Ridge, North Carolina on October 09, 2017
    I haven't gotten it in stalled yet. I am waiting for my grandson to give me a hand.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Receoved order in 2 days. The shipping charges were very reasonable. Easy process.
    by David from New Freedom, Pennsylvania on August 16, 2017
    The PT35 trim and tilt makes launching and recovering my boat at the rocky launch ramp easier and now withn o fear of doing damage to t he electric outboard as has happened in the pastt
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Power Tilt
    by Linda from Vero Beach, Florida on August 28, 2016
    Great product and service.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    CMC power tilt awesome
    by John from Malden, Missouri on May 03, 2015
    like the way it is made looks well made . havent tried it yet . but they tell me i will love it .
    (0 of 2 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    power trim and tilt
    by Lynn from Crofton, British Columbia on July 26, 2014
    completely satisfied other than shipping costs.
    (2 of 2 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Just what the dinghy needed
    by Stephen from Seattle, Washington on May 10, 2014
    This product is a real back saver and it improved performance too!
    (3 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    tilt and trim
    by Cheryl from Portage, Michigan on March 12, 2014
    We have not even installed it yet my boat is still covered with snow. We live in Michigan. When we do use it and I am not happy with it I will let you know. I will up date my review when I get it installed and can use it. Thanks
    (0 of 22 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Boating in the new millennium
    by Kevin from Waycross, Georgia on September 28, 2013
    I boats had the best price the tilt trim is everything I was hoping for shipped in a timely matter . Thanks I-boats K.White
    (3 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    great product
    by William from Wareham, Massachusetts on June 27, 2013
    installed it my self on a 2112 15hp suzuki. no problems installing. been out a few times and it works perfect. the boat is a 2112 Tracker V15 Laker.
    (4 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Power tilt and trim
    by Martin from Durand, Wisconsin on May 30, 2012
    I am very satisfied with this product. It was easy to install and works very well. I would recommend this product to anyone interested in a tilt and trim unit such as this one.
    (5 of 6 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Great service. The best trader for .. Canada (Quebec)
    by Daniel from Saguenay, Quebec on April 28, 2012
    Super. Not always easy to order from USA to Canada. I will certainly order again. Customs fees, tax and shipping are reasonable and no hidden charges.The PT-35 works very well. Bye Daniel.
    (7 of 8 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    PT-35 TT
    by David from Cedar Rapids, Iowa on October 04, 2011
    Excellent product. Works great.
    (7 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    3 E
    by John from Fort Worth, Texas on September 21, 2011
    EEE Easy to install-less than 30 minutes Excellent in operation Extra speed Installed on an old 1974 Starcraft 16 ft with a 1984 Evinrude. Added toggle switches up front and on transom. Much quicker up on plane and flatter planing. Highly recommend to one and all.
    (25 of 25 people found this review helpful)
    Was this review helpful?
    Q:
    So is there anything out there for a 50hp?
    A:
    Yes CMC offers another one up to 130 HP. 13001 is the part number for that.


    Q:
    I have a 9.9 yamaha 2 stroke kicker 1990's will this be suffice for the pt 35?
    A:
    Yes.


    Q:
    Compare this unit to panther integral model 25?
    A:
    Panther is designed for certain 2-stroke Johnson/Evinrude engines only. The PT-35 can accommodate more outboards. For more info give us a call at 1-800-914-1123.


    Q:
    IS EVERYTHING INCLUDED WITH THIS KIT?
    A:
    Refer to the Description tab to see what is all included with this product.


    Q:
    What is the Warranty on this?
    A:
    Frame structure is 5 year and hydraulic actuator mechanism is 1 year.


    Q:
    Will the PT-35 accomodate an Evinrude E-Tec 40 horsepower tiller model?
    A:
    According to our files, this will not work for anything larger than 35 horsepower.


    Q:
    Will this unit work with a 4stroke 30 HP Suzuki?
    A:
    According to CMC this should work for your application. Only certain 4-stroke Yamaha's will not accommodate PT-35.


    Q:
    What is the maximum weight motor weight?
    A:
    It generally will only fit up to 35 horsepower, and certain 4-stroke engines may not fit with this product. You will have to check to see if your unit has clamps and thumb screws. Certain engines will require the PT-130 instead.


    Q:
    So how do I know what motor and what will fit your product. Do you have a chart.?
    A:
    It really comes down to the horsepower, primarily. Also, if it is a Yamaha 4-stroke or any engine similar to that, it will not fit. We have just been informed by CMC that it will only work with 2-stroke engines that go up to 35 horsepower.


    Q:
    How do I find the trim motor that matches your product.???
    A:
    If you have an engine that is 35 horsepower or less and is a 2-stroke, this should work for you. If you have anything larger than that, you will want to consider the PT-130. We have this available with or without the gauge, part numbers 13001 or 13002.


    Q:
    Where is the acctuator switch? Can it be moved?
    A:
    Yes, it can be moved, you can mount it where ever you want, most mount it by their controls.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies