This product has been discontinued.
Sierra
Sierra 18-7037 - Carburetor Kit
Price: $17.95
Discontinued
Save: $5.94
(24% Off $23.89)
Part # 18-7037
(Discontinued)
Replaces OEM part #
  • CHRYSLER FORCE FRK739
  • CHRYSLER FORCE FK10108
  • CHRYSLER FORCE FK10057
  • CHRYSLER FORCE FK10027
  • CHRYSLER FORCE FK10008
  • CHRYSLER FORCE FK10007
  • CHRYSLER FORCE FK10005
  • CHRYSLER FORCE FK10004
Average Customer Review for Sierra 18-7037 - Carburetor Kit
Full StarFull StarFull StarFull StarHalf Star
Based On 15 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Worked great
by Roger from La Crosse, Wisconsin on October 08, 2017
It worked great
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
correct gaskets
by Samuel from Rochester, New York on July 09, 2016
all the correct gaskets, but needle and seat were of some other world (5x's bigger than mine) and yes I made sure I ordered the correct kit for my application,
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Right Kit
by Joseph from Ellicott City, Maryland on May 13, 2016
The kit had everything necessary for a complete rebuild. The outboard wouldn't start or run before the kit. Runs great now.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
It worked!
by Todd from Salisbury, Maryland on August 27, 2013
The needle that sits just above the carb float had seized up and I had to take it out with pliers. After that I soaked the whole carb (minus platic pieces) in some cleaner over night. Then put it all back together again with the new needle and seals. Runs like a charm and the first time boat has been able to idle well since I've owned it. Force 120hp 1996
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Everything I neede to get sea worthy!
by George from Denver, Colorado on July 08, 2013
Thank you iBoats!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carburetor kit
by Audie from Haleyville, Alabama on April 11, 2013
Good price fast delivery. Works great!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice Carb Kit
by Enrique from Choctaw, Oklahoma on September 01, 2012
I ordered and received Sierra carb kit 18-7037. It is packaged well and is stocked well with gaskets, needle seat, pivot arm, spring, press-fit plugs and carb diagram sheet. The picture says it all in far fewer words. I'm pleased with this kit and now I am looking to order motivation to actually make my lazy self remove, disassemble, clean, reassemble with the new parts and reinstall the carb on my engine. I found what I thought was anti-procrastination spray but turned out to be anti-perspirant. At least I was able to solve one of my other problems.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice Carb Kit
by Enrique from Choctaw, Oklahoma on September 01, 2012
I ordered and received Sierra carb kit 18-7037. It is packaged well and is stocked well with gaskets, needle seat, pivot arm, spring, press-fit plugs and carb diagram sheet. The picture says it all in far fewer words. I'm pleased with this kit and now I am looking to order motivation to actually make my lazy self remove, disassemble, clean, reassemble with the new parts and reinstall the carb on my engine. I found what I thought was anti- procrastination spray but turned out to be anti-perspirant. At least i was able to solve one of my other problems.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
carb kit i
by Floyd from Clairmont, Alberta on July 16, 2012
i havent got it yet
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Force carb kit
by Michael from LaCrosse, Wisconsin on July 04, 2012
Great kit, it had all the parts I needed, all the parts fit fine and at a very good price!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Product
by Samuel from Verona, Wisconsin on September 18, 2011
Very easy to use and packaged well.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carburetor Kit - Sierra 18-7037
by Frank from Novato, California on June 20, 2011
I have a 1979 Chrysler 70hp 3cly outboard. There was gas spilling out of the carb bores. The new needle and seats from the kits took care of the problem and all the gaskets fit properly. I am completely satisfied with the kits I purchased from iboats.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carb. kit et al
by Jerry from Terrell, Texas on August 14, 2010
I have made several orders from iboats of things I need for my old 1972 Chrysler 55. I had thought they would be hard to get, but iboats had them, they were class goods and were shipped expediently.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Very impressed
by Nathan from Morgantown, West Virginia on July 22, 2010
The parts are great quality and the shipping is super fast. I ordered one day and they were shipped the next. It dont get any better than that. They have my business from now on!
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Carburetor Kit for Chrysler/Force Outboard FK10007 FK10005 FK10008 FK10027 FK10
by a Customer on August 16, 2009
Delivered what was advertised and on time.
(9 of 16 people found this review helpful)
Was this review helpful?
Q:
Is this kit for ONE carb only ??
A:
Yes it is to rebuild one carb only.


Q:
Hi I have a 1991 120 HP. Force model?
A:
We do not have an aftermarket version kit. We will need to know the engine model number to confirm kits.


Q:
Will this kit with a walbro we2 carb?
A:
We will actually need to know engine information to match carb kit for Chrysler/Force motors.


Q:
Is this the right kit for my WE 17A 628061-1 carb?
A:
We do not pull up that carb number. We will need to know engine info including serial number.


Q:
Will it fit a 1969 Chrysler 20 hp?
A:
No it does not. We do not have a kit for your motor. You will need to check locally.


Q:
Model X1508F9A Ser: X1007 looking for carb kit?
A:
We would need to know the Manufacturer, HorsePower, and year of the engine to help you with this question.


Q:
Will this fit my 1990 force 90hp 3 cyclinder?
A:
We can only match up Carb kit by the Force model number. Contact us the number at the top of the page with that model number and we can look.


Q:
Will this fit force 85 hp 856x5l?
A:
No it will not. Unfortunately we do not carry the carb kit for your motor.


Q:
Will this carb kit fit my 1989 force 50 hp motor model number 507x9d? If not, which kit fits it and what's the part number? Thank you.?
A:
This kit will not work with a 1989 Force (507x9d). Sierra does not have a kit that will work for this engine.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies