This product has been discontinued.
Sierra
Sierra 18-3214 - Mercury/Mcm Impeller Repair Kit
Price: $31.95
Discontinued
Save: $10.84
(25% Off $42.79)
Part # 18-3214
(Discontinued)
This item is found in the following Product Families
Replaces OEM part #
  • HONDA 19210-ZWL-303
  • MERCURY MARINE 47-43026T8
  • MERCURY MARINE 47-43026T6
  • MERCURY MARINE 47-43026T11

For:
  • HONDA BF70 (1996-1998)
  • HONDA BF90 (1996-1998)
  • MERCRUISER Alpha 1 - Gen II (S/N D494569 & UP)
  • MERCRUISER Vazer
Contains:
    ( 1 ) 18-2564 Water Pump Base to Face Plate Gasket, replaces O.E.# 27-43033-1
    ( 1 ) 18-2565 Water Pump Base to Gear Hsg. Gasket ,replaces O.E.# 27-43047-1
    ( 1 ) 18-2566 Face Plate to Water Pump Cover Gasket, replaces O.E.# 27-817277
    ( 1 ) 18-2944 Seal Ring, replaces O.E.# 26-45577
    ( 1 ) 18-3056 Impeller, replaces O.E.# 47-43026
    ( 1 ) 18-3122 Impeller Plate, replaces O.E.# 817276
    ( 1 ) 18-7420 O-Ring, replaces O.E.# 25-21836
**60hp 4-Stroke / Fits 4.25" Torpedo Diameter only
Full StarFull StarFull StarFull StarEmpty Star
Based On 23 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Great Kit
by David from Ennis, Texas on July 07, 2017
Kit was exactly what was needed to rebuild the water pumps on my Force/Mercury 90hp motors. Great Kit, Good Price
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great deal
by Jackie from Buchanan, Michigan on June 25, 2017
The impeller kit fit the 1996 120hp force perfectly. Iboats is one of the best sites ever
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Impeller review
by Curtis from Deerfield, Michigan on October 22, 2016
Product arrived in timely manner ,appears to be good quality ,however the kit does not come with upper sling seal that I had to purchase from a marine dealer
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Will not fit 1998 Mercury 60HP 2 stroke!
by Randy from Fort Dodge, Iowa on August 14, 2016
Impeller was too big and gaskets and plate were different from what was on there. Customer service rep told me this kit would work after telling him model and serial# on motor...
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Impeller repair for my 1995 Mercury
by Peter from Lombard, Illinois on August 10, 2016
The kit came quickly and the repair went smoothly. I was back out in the water enjoying my boat again!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
iboats is the best!
by Anthony from Johnsburg, Illinois on June 26, 2016
Great product, perfect fit for my 1990 Mariner 115. iboats products consistently work great and are shipped quickly. Customer service always steers me to the right product. Thanks for helping me keep that old motor running!
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
impeller kit
by Charles from Somerset, Kentucky on May 21, 2016
impeller kit and gaskets fit perfect for my Force by Mercury.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
impeller kits
by Stephen from Newton, Alabama on September 13, 2015
I bought two impeller kits for my outdrive one worked and one didn't. I ordered another one from a different vender, and replaced the one that didn't work. When we took the out that didn't work one of the blades were deformed. The one we put back in work OK. Guess it was just a bad impeller.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Wrong part
by Darryl from Laotto, Indiana on August 24, 2015
It did not look like my parts
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Adequate parts, OEM is better
by Michael from Grand Blanc, Michigan on June 08, 2015
This kit seemed fine. I think I'll stick with OEM from now on though. The rubber lip on one gasket is thinner and the way it was packaged in a bag caused the thin gasket to wrap around the metal plate and rip slightly. This might be one part to not try to save a few bucks on, in my opinion.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Happy with all. Looks great
by Richard from Bolivia, North Carolina on April 16, 2015
Got it fast and looks good
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
We are very satisfied
by Leonard from Darlington, South Carolina on April 15, 2015
We just purchased a houseboat that came with a 98 Honda 4 stroke engine that needed a water pump. We called dealerships (which didn't have it and couldn't get it) and search the web, when we came to iboats web page we found what we needed and it was reasonable priced. We ordered it on Tuesday it arrived on Friday in time for our fist weekend on our boat. Thanks iboats
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Force water pump kit
by Steven from Monticello, New York on July 31, 2014
Since this is a spare kit, I haven't used it. The kit appears to be identicle to the original. Shipping was quick and price was good.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great parts wrong choice
by Charles from Kimball, Michigan on May 30, 2014
What I thought I was ordering turned out to be incorrect. But the quality of the parts recieved are top notch. Although still waiting on a refund.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Pats Missing
by Jim from Pensacola, Florida on January 15, 2014
Package was missing 2 O rings due to knife cut along side and parts dropped or were taken out. Iboats shipped complete package, ASAP! I have had nothing but GOOD results for Sierra products.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Way easier than I expected
by Joe from Cary, North Carolina on September 21, 2013
First time I did this and it was really simple. Parts fit perfectly. There are a number of good YouTube videos on how to do this, so if you are at all comfortable with a wrench, no worries on doing a good job. Do put a pad of cardboard under the outdrive when you split the case because it will slobber some oil - maybe 3 tablespoons.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
pump impeller kit
by Rodger from Guntersville, Alabama on July 10, 2013
i liked the kit
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
NO FACE SEAL
by Jon from New Albin, Iowa on April 10, 2013
I purchased 2 of these kits, one for my 60hp 4 stroke bigfoot, and one for my freind's 60hp 4 stroke standard. Repaired mine first, kit is fine for that but in product description, it should clearly state "FACE SEAL SOLD SEPERATELY". The second issue I have is that this same kit is listed for the standard lower unit. Per my Mercury shop manual, this is incorrect. I still need to contact iboats in this reguard. The no face seal warning, and incorrect part# reference is what is dragging this review down, what I was able to install though was fine.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
5 star rating
by Brian from Holiday, Florida on January 25, 2013
This was my first order with iboats. Fast service. Product as described. Reasonable price. Will use again.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Water Pump impeller repair kit
by Vernie from St. Augustine, Florida on November 18, 2012
The kit was shipped promptly and was the exact fit for my Honda outboard. This is a great place to shop for outboard motor parts.
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Incomplete kit
by James from Waco, Texas on July 31, 2012
This kit did not include a face seal for the water pump. This is a critical part and should be included in the kit. The rest of the parts were acceptable, but make sure to order the face seal separately.
(5 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
worked great
by Zach from Leawood, Kansas on April 03, 2012
Worked great, make sure you order a shaft seal too this doesnt include one
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
It's an impeller you will get.....eventually.
by Jonas from Bedford, Texas on July 06, 2010
The impeller is an impeller, be careful when ordering because it will take 4-7 days for them to get around to shipping it. Returns take more than 2 weeks to credit. Be careful.
(35 of 46 people found this review helpful)
Was this review helpful?
Q:
Does this kit fit a bf90ayjhta Honda motor and not what kit does?
A:
We do not have original information for the Honda Jet Outboard. So we cannot match up kit without OEM number.


Q:
I have an Mercury Engine Serial?
A:
If you can confirm serial number we can match it up.


Q:
Will this fit OT131788 2000 Mercury 125 hp?
A:
Yes. This will work for your engine.


Q:
Will this fit a 1989 15 hp gamefisher model number 225.581501?
A:
No it will not. We do not have an impeller kit for your motor.


Q:
My serial number is 1B027272 will this part fit my engine?
A:
Yes. This is the correct impeller repair kit for your engine.


Q:
Will this fit 1999 mercury 90 hp. Part no. 37-856984 8?
A:
This kit is for a 90 hp, 6 cylinder, 2-stroke engine with the serial number beginning 4845301 and up. The serial number needs to be provided to match the kit with the engine.


Q:
Will this fit a 2000 mercury 60/45 jet serial number OT097039?
A:
Yes this will work for your motor.


Q:
Serial number 5668683 stern drive number 5598836 1980 120 hp. Mercuriser need impeller?
A:
For the impeller kit for your outdrive you need part number 18-3217.


Q:
I have a 1991 4.3 L alpha1 Gen 2 will this kit fit?
A:
Yes this kit will fit.


Q:
Does this fit 1984 fourwinns horzions 190.. Mercrusier 3.0?
A:
We will need to know the outdrive model or serial number. If you have the Alpha One, but not Gen II (or pre-Alpha) you need part number 18-3217.


Q:
I have a 2008 Mercruiser 4.3L Alpha One. The serial # is 1A079304. Will this kit fit?
A:
Yes this kit will fit your Mercruiser Alpha One, Gen II.


Q:
Will this work for a Force 120hp '98?
A:
Yes this will work with your outboard motor.


Q:
Will this fit my engine 2002 90 ELPTO OT 418471?
A:
Yes this kit will work with your Mercury outboard.


Q:
Does this work for outdrive SN# 0L144645?
A:
This impeller kit will work with your Alpha One, Gen II outdrive.


Q:
Will this work for a 1971 Chrysler 12.9 model#122hb?
A:
I can not tell if it would work based off of the model number. I would need the serial number and whether it is an outboard or sterndrive.


Q:
Where is the face plate mentioned in the comments?
A:
Faceplate is the bottom left part in the picture. 18-2566 is the part number for it.


Q:
Does this kit contain everything needed to rebuild water pump?
A:
It is an impeller kit, so it is a repair kit mainly for the impeller. You may want to do a search for a complete water pump kit. However, the main component in any water pump assembly that needs repair/service is the impeller, so this may work for your purposes.


Q:
Whats the diffrence between same part but with a D at the end of it.?
A:
The D just indicates the packaging, all parts contained in kit are the same.


Q:
Does this fit a 1992 alpha one gen 2 sterndrive?
A:
Yes this will work for your outdrive.


Q:
Will this fit a 1987 Mercruiser Alpha I gen 1 Water Pump?
A:
Yes it should, provided that your serial number matches up. This is a standard replacement for Alpha 1/Gen 2 Mercruiser engines.


Q:
I have a 1998 force 120 elpt with a 4 bolt metal water pump cover ,will the 18-3214 kit work?
A:
If it is an Alpha 1/Gen 2 engine and the serial number matches up, then it will work. For more assistance, feel free to call our sales department at (800)-914-1123.


Q:
What is the impeller for a 1977 120 horse Chrysler?
A:
According to our charts, the one for your engine would be the 18-3085, assuming your model is a 1206/1207HA-HE, or 1208HA-HC engine.


Q:
Looking for a water pump kit for a 1976 120 horse Chrysler engine?
A:
We would need to know the original part number of the kit. You could consider contacting a mechanic or Mercury to get that and we could cross reference it for you if you call the number at the top of your screen.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies