This product is currently out of stock. As inventories are updated it will again be available for purchase.
Price: $23.01
Save: $2.98
(11% Off $25.99)
Part # 55-9000
No Reviews

The Panther Integral Power Tilt and Trim is designed to quickly add a tilt and trim option to old Johnson/Evinrude outboards that do not have built-in tilt and trim. It quickly attaches to the existing motor bracket without any alterations. The patented break-away safety feature releases the motor in the event of hitting a log or any object. Moreover, it brings the motor to safe position to continue your ride.

· Provides tilt and trim feature to old Johnson/Envirude outboards

· Easily and quickly attaches to the existing motor bracket

  • Revolutionary break-away feature

The Trim and Tilt Saltwater Anode Kit from Panther has a sacrificial anode to offer optimum protection to the tilt and trim in salt or brackish water. It comes with a mounting bolt for quick attachment.

Features of Panther Integral Power Tilt and Trim Johnson/Evinrude:

· Offer trim and tilt option to motors that don’t have built-in trim and tilt

· Directly attaches to your existing motor bracket

  • Patented break-away safety feature

· Designed to use with Johnson/Evinrude two-stroke outboards with horsepower rating of 20, 25, 28, 30 and 35 and with 1976 to 2004 motors

· Includes relay control and harness, 12 feet corded up/down switch and owner’s manual

· Attach the locking shallow water drive (flip switch) to the side of the motor (not the front)

· Anode kit has sacrificial anode that protects the tilt and trim in salt/brackish water


Manf. Part # 55-0025

· Type: Integral Electric Power Tilt and Trim for Johnson Evinrude

Manf. Part # 55-9000

  • Type: Trim and Tilt Saltwater Anode Kit

Learn More:

Product Catalog

Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Based On 1 Review | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
DOES NOT fit 1998 3 cylinder 25HP
by Lon from Rogers, Minnesota on June 28, 2014
If you have a 1998 - 3 cylinder 25HP Johnson DO NOT buy this unless you are very skilled at improvising and you have 4 hours to kill. The bracket that comes with this is too long and wide and requires you to knock out the factory spring hooks to install it and once you do that there is no going back you have to make it work. The tilt works after you get it installed but it binds on itself at the bottom of the stroke and restricts the steering. IT IS NOT A 1 HOUR INSTALL ON THIS ENGINE AND SHOULD NOT EVEN BE SOLD FOR THIS ENGINE!!!
(27 of 34 people found this review helpful)
Was this review helpful?
Will this fit on a 1989 evinrude 48 hp SPL?
No it will not. It only works with 20, 25, 28, 30, and 35 hp made from 1976 to 2004.

Do I need to remove motor to install this?
Yes, you will need to remove the motor in order to install this.

Will this fit on a1979 dura craft boat model 1519ds?
It is fit to the engine, not the boat. The Integral Trim and Tilt will work with Johnson/Evinrude two-stroke outboards 20, 25, 28, 30, and 35 hp made from 1976 to 2004.

Where can I see a installation manual?
If you contact Panther (aka Marine Tech) they might be able to send you an installation manual.

Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies