This product has been discontinued.
Sierra
Sierra 18-5179 - Plug In Ignition Coil
Price: $27.95
Discontinued
Save: $10.04
(26% Off $37.99)
Part # 18-5179
(Discontinued)
Replaces OEM part #
  • OMC 582508
Average Customer Review for Sierra 18-5179 - Plug In Ignition Coil
Full StarFull StarFull StarFull StarHalf Star
Based On 14 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
4 Brand New Ignition Coils, 1 broke after 8hrs use, 4 miles offshore
by Scott from Graham, North Carolina on August 07, 2017
I bought 4 brand new ignition coils for my 1998 Evinrude. Everything went together well and I used the boat for about 6-8hrs in the Pamilico Sound. Decided to take the boat offshore and after getting 4 miles offshore we set up to troll and the motor killed out. After a little troubleshooting I pulled the motor cover off and found the bottom half of the ignition coil with the plug wire connected to it in the bottom of the motor housing. Very expensive sea tow and about 6hrs of headache. Not something that should happen after 8hrs of use.
(14 of 24 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
parts
by Thomas from Houma, Louisiana on August 24, 2016
Quick, friendly service
(15 of 29 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect replacement coil pack.
by Robert from Kaneohe, Hawaii on August 04, 2016
This part is an exact match of the OEM part. It is easy to remove and install yourself. The price is very reasonable. The are very few businesses on Oahu that carry this part and it is way more expensive. Ordering was easy and the shipping was fast. It is best to change your coil packs before they give trouble. You can keep the ones you remove as spare. Change your wires when changing your coils to have peace of mind and a pleasant day out on the water. A little insurance goes a long way so that you are not stranded out on the water.
(15 of 26 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great company!
by Jamie from Ponchatoula, Louisiana on July 09, 2016
Perfect fit! Fast shipping!
(15 of 27 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Shopping at Iboats - fast and easy
by Francis from Lockport, Illinois on June 14, 2016
Found the right parts quickly and easily. Received parts right away in excellent condition, well packaged and had boat in water right away. Excellent service!
(15 of 25 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good service
by Ken from Karnak, Illinois on October 29, 2015
good price excellent shipping dont know why anybody would look anywhere else thanks Iboats
(15 of 27 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
satisfied
by Robert from Jamestown, Pennsylvania on September 15, 2015
exact replacement
(15 of 28 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Ignition Coil
by Joe from Hendersonville, Tennessee on June 26, 2015
Installed coils on my 1986 Evenrude 150 worked great.
(16 of 26 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Plug and Play Replacement Parts
by Butch from Winnemucca, Nevada on September 30, 2014
I have had this 15 hp Johnson since new, 1985. This year it started running rough erratic no high speed poor trolling. After walking through step by step troubleshooting, I was only running one cylinder, one bad coil. I replaced both, perfect fit, half hour job. First pull my old motor was new again. Better than any computer Plug and Play!!
(17 of 28 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Awesome coils
by Gary from Westerly, Rhode Island on September 12, 2014
My boat was running a little ruff. It is a 1993 Johnson 200 Venom series. The previous owner had replaced half the coils,and I have been replacing plugs every season. The plug wires were original. I bought all new coils, wires, and plugs changed everything out in an hour and 10 mins using die electric grease and now it starts and runs like new. Best $250 I ever spent.
(16 of 26 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Never used them package is good.
by Timothy from Forest Lake, Minnesota on September 08, 2014
I ordered these along with two power packs. The power packs worked great so i never put the 4 new coils on.
(13 of 25 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Ignition coil
by Michael from New ulm, Minnesota on May 11, 2014
Shipped and received very fast! The product was exactly as described ! Couldn't be happier !
(13 of 26 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Johnson coils
by Charlie from Mount Pleasant, South Carolina on July 23, 2012
I ordered a power pack, stator and ingnition coils for my son's Johnson 25. very pleased with the service on getting the products quickly. Motor started right up. Thanks, CB
(13 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good
by Robert from Denham Springs, Louisiana on October 21, 2011
worked
(14 of 23 people found this review helpful)
Was this review helpful?
Q:
Will this fit 1994 Evinrude 200 part on it now is 582508 14CT-OA?
A:
Yes this is the correct coil for your motor, it cross references with 582508.


Q:
Will this work for a 1985 Johnson 140 vro?
A:
Yes this will work for your motor.


Q:
Will this fit a 78' evinrude 60hp vro 3 cylinder coil 582508 26BN-OA.....also has 5 inch long spark wires i need as well...thank you kenny?
A:
According to the technicians at Sierra, part number 18-5176 will actually be the one that you need for your application. Here is a link showing the product: http://www.iboats.com/mall/partfinder/?cart_id=197857473&gd_get_grid=1&gd_grid_id=1731&gd_poid=109170&gd_row=200&gd_search_14139=60&gd_search_14140=&session_id=033045065


Q:
Will this fit a 1980 140 HP evinrude?
A:
This is a aftermarket part, you'll need to call or email us with your engine model number so we can look up the diagram of your engine to see if this matches to your OEM part number from your diagram.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies