This product has been discontinued.
EZ-Steer
E.Z.Steer Adjustable 23"-26" Auxiliary Sterndrive Steering Kit for Mercruiser Alpha1
Price: $268.76
Discontinued
Save: $131.23
(32% Off $399.99)
Part # 30002
(Discontinued)
This item is found in the following Product Families
#30002 rod size: Center to Center measurement 23" - 26"

The E.Z. Steer system is a patented self-adjusting rod, which steers the auxiliary outboard motor from the main wheel. The rod will self-adjust by using the built in turn stops on the engines. When both engines are in the down running position and straight ahead, the rod will be at its shortest measurement. With the auxiliary motor in the raised position, the rod will extend the first time the main unit is turned away. Then, as the main unit turns back and forth, the auxiliary unit will follow the main unit. When the auxiliary engine is lowered, the rod will shorten the first time the main unit is turned towards it. Again, the auxiliary will follow the main unit back and forth.

Alpha I kit consists of:
  • Main engine bracket assembly
  • Auxiliary engine bracket assembly
  • Rod assembly 23" - 26"
  • Full StarFull StarFull StarFull StarEmpty Star
    EZ Steer
    by Mike from Port Franks, Ontario on June 02, 2014
    i boats get a 5 rating, fast, friendly service, they looked after all the canadian and us taxes. shipping, and customs as quoted and I still saved a couple of hundred dollars over my cost in Canada. The EZ steer gets a 4 rating. It was easy to install with good instructions and works really well. The only complaint is that when trolling with the kicker at approx. 2500 rpm is that the detent tension sytem sometimes slips. I'm going to add a little more tension on the spring loaded balls and see if this corrects the problem. Over all, very satisfied.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Q:
    I have 1988 omc outdrive, do you have one tht will fit?
    A:
    We will need to know the auxiliary motor and the length you will need in order to confirm correct part.


    Q:
    Is that the total length 26" from outboard to stern drive?
    A:
    Yes, the maximum length is 26 inches stretching between the outboard and stern drive.


    Q:
    I have a 90hp mercury and a 9.9 kicker mercury both 2021 and it 28 inches from center to center which one would I need ?
    A:
    If the main motor is a 4-stroke EFI the part number is EZ-69510.


    Q:
    I need a rod 28" to 40" i have panther 550416 mount?
    A:
    The only other size we have listed is this: http://www.iboats.com/Auxiliary-Sterndrive-Steering-Kit-for-Mercruiser-Alpha-1-Adjustable-29-33-E-Z-Steer-EZ-Steer/dm/view_id.1093806


    Q:
    I have a 1992 120 hp force and a 2009 6hp nissan marine kicker 32 inches a part what is the right kit number?
    A:
    According to EZ Steer's fit guide, you need part number 60003. It is for any 2 stroke motor as the primary motor and kicker motor. If you have further questions contact us at the number at the top of the page.


    Q:
    I have Yamaha 60HP 4 stroke and Yamaha 9.9HP 4 stroke. Do you have a E.Z.Steer that fit them?
    A:
    Are these 2 or 4 stroke engines? Also, what is the distance between the motors?


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies