This product has been discontinued.
Sierra
Sierra 18-7043 Carburetor Kit
Price: $20.95
Discontinued
Save: $4.94
(19% Off $25.89)
Part # 18-7043
(Discontinued)
Replaces OEM part #
  • OMC 439071
  • OMC 398532
  • OMC 383067
  • OMC 383052
  • OMC 382049
  • OMC 382047
Average Customer Review for Sierra 18-7043 Carburetor Kit
Full StarFull StarFull StarFull StarHalf Star
Based On 42 Reviews | Write Review
Full StarFull StarFull StarFull StarEmpty Star
Fits well
by Peter from Markham, Ontario on November 17, 2017
These kits are good overall, comes complete and fits well. Not my first set and won't be my last. Good price and shipping from iboats.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Evinrude Fisherman 6HP carb kit
by Darryl from Newmarket, Ontario on September 05, 2017
Worked great, this kit had everything I needed
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Received this product on timely maner
by Johnny from Visalia, California on August 09, 2017
Everything worked out great, got my 6hp running again.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked great
by William from Granbury, Texas on May 24, 2017
The parts worked great I am a mechanic so it was easy for me to install . The only thing is I wished it came with the float. But great product. Motor runs with no issues know.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat motor gasket
by Katheryn from South Shore, Kentucky on April 25, 2017
Exactly what I needed Very satisfied Although I'm waiting on a response to another request I emailed to you
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Carb kit
by Jonathan from Livonia, Michigan on October 19, 2016
Generally worked well. There were a lot of extras in here that were not needed for my motor. Also, I ended up using the original float needle, as I could not figure out how the spring with the new float needle was supposed to work. These complaints are more on Sierra for making a kit to work with multiple motors, and not providing directions on the float needle spring. Otherwise, the kit worked for me and got my motor back up and running.
(3 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb kit
by Donald from Winnipeg, Manitoba on October 17, 2016
very satified
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
carb kit
by a Customer from Weatherford, Texas on September 15, 2016
Just wish it had came with a float other then that it was perfect
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Company and Fair Prices
by Gilbert from Bridge City, Texas on July 18, 2016
I like to deal with iboats because of their detailed diagrams and parts list,fair prices,fast shipping and you can always get help with ording by calling in them
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Excellent
by Corey from Eau Claire, Wisconsin on July 09, 2016
Great!!
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice kit
by Paul from Maple Grove, Minnesota on July 06, 2016
A little clearer instructions or labeling for the less experienced person would be nice but if you take your time it's not too bad. A new packing for the mixture needle would be good too.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good kit. everything you need to rebuild an old carb.
by a Customer from Maxton, North Carolina on June 11, 2016
Quality replacement parts no corners cut. "Just close enough to almost work", is not what you will find here. Everything is an exact fit.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
1966 Johnson 6hp Carburetor tune up.
by Donald from Hancock, Iowa on May 01, 2016
This kit contained the parts that I needed for overhauling the carburetor on my Johnson 6hp motor, 1966 model. The needle jet in the carb was stuck. Cleaned the parts like the instructions suggested, replaced the parts in my carb with the parts in the kit (few extra, which I saved in case). Got it to fire, and after running for a few minutes, started doing the gas ratio adjustments. Runs great now. Motor had not been used for about 10 years. It is a great kit when it gets the job done on the first try.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Kit
by Justin from Fort Worth, Texas on April 14, 2016
Good kit, was able to RR the carb on my outboard.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carb kit
by William from Tampa, Florida on February 07, 2016
Excellent kit, I was surprised that it came with jets etc.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carburetor Kit - 18-7043 - Sierra Part: 18-7043
by Scott from Kunkletown, Pennsylvania on December 15, 2015
Very satisfied! Kit included all the necessary parts to rebuild the carburetor. After years of sitting in my father's garage, the 1970 Evinrude Mate run like a charm.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
carb kit
by Richard from Fort Collins, Colorado on November 27, 2015
just what I wanted
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good product
by James from San Diego, California on November 16, 2015
It did the trick for my 1972 Evinrude Mate 2. Included Several extra mounting gaskets of various sizes. Included extra needle valve packing gaskets and some other extra stuff too. Delivery was fast as well.
(3 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great product
by Thomas from Wheatfield, Indiana on October 17, 2015
Fast shipping
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Looks good so far
by Mark from Howell, Michigan on August 06, 2015
I haven't had time yet to rebuild the carburetor, so as far as how well the kit meets my needs, I'm not quite sure. As far as ordering and receipt of product, I am very pleased with the process and quickness of delivery. Thanks.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Kit was as described.
by Lane from Winchester, Virginia on July 27, 2015
All needed parts were included in the kit.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
fast shipping, great price
by Richard from Chugiak, Alaska on June 20, 2015
Kit didn't have the correct (needle) o-rings for my 2 hp Johnson, but everything else was quality product. This was not a complete surprise as the kit advertised that it wasn't an exact fit for my carb. It was the closest I could find. Thanks I-boats!
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb rebuild
by Gary from Yuma, Arizona on June 11, 2015
i am rebuilding two 1955 evinrube outboard motors.i orderd kit and got it fast and it was better than i thought it would be.the same kit works on the 5.5 motor and the 15hp motor.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carb kit
by Duane from Donnelly, Idaho on May 26, 2015
Excellent couldn't be happier after rebuilding carb and some tweaking of ignition system motor is running like a champ. A little cold blooded but after she warms up fires up first pull every time.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
18-7043 carb kit
by Jeffrey from Menomonee Falls, Wisconsin on May 03, 2015
Only 4 stars for this kit. I found the packing washers to be too tight, making needle adjustments difficult.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
High Quality
by Jimmy from Lafollette, Tennessee on April 13, 2015
Great product. High quality materials. Designed for multiple carbs, don't panic when you have extra parts left over.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Carb Kit
by John from Panama City Beach, Florida on December 09, 2014
Good - Hinge pin was too long
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carburetor Kit - Sierra
by Daniel from St. Peter, Minnesota on October 27, 2014
This is a good carb kit with all the parts I needed for a thorough carb cleaning and replacement of typical worn out parts and gaskets.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Car. Kit
by Robert from Palm Bay, Florida on October 02, 2014
Parts fit perfectly. Motor runs great Will e a return customer
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Sierra Carburetor Kit
by Bryan from Bellingham, Washington on May 31, 2013
Exactly what I ordered and correct for my motor which is very old (1960 Evinrude). The price was very reasonable and the shipping was inexpensive and fast! Thanks iBoats. I will definitely be ordering more from you.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Great kit
by Scott from Corryton, Tennessee on May 27, 2013
Thanks , the kit work great.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Carb Kit
by James from Grapevine, Texas on August 23, 2012
I recieved the carb kit alot faster than I would have expected, everything was there, and my motor is running much better. -A1 service. Thank you, Jay
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great service
by Julian from Welland, Ontario on July 15, 2012
Rreceived the parts I needed ,fast . Very professinal and solid service. Thank you. Julian
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Missing parts
by Brian from Plymouth, Minnesota on May 07, 2012
I was disappointed that this kit did not include the sediment bowl gasket
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
nice kit
by Sean from Virginia Beach, Virginia on April 29, 2012
great kit but could use written instructions that is more detailed.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
1969 6HP Johnson Outbourd Carb Kit
by Scott from Sayreville, New Jersey on April 24, 2012
This kit was perfect and shipped fast. Just remember on thing when rebuilding these carbs and that is the high speed jet is in the bowl behind the bowl drain screw. If your motor only runs on full choke there is a good chance that the high speed jet is plugged so make sure you clean it out. I rebuilt my carb with this kit and it runs like new.
(1 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Very Satisfied
by JIM from Cavalier, North Dakota on March 26, 2012
Having a 1962 10 HP Sport Twin it was a pleasure to receive the exact parts that I needed 4 days ahed of schedule.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Fast, Faster and Fastest
by Randy from Newborn, Georgia on February 23, 2012
Product seems like any other. Price was great. Shipping was excellent. Great job Iboat!!
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect fit.
by Matthew from Pomona, California on December 23, 2011
All parts fit great. Good kit.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb kit
by Barry from Point Roberts, Washington on June 22, 2011
worked perfectly
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb kit , exelent
by Keith from Marianna, Arkansas on June 07, 2011
exelent carb kit, contains all you nee for a complete rebuild.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Carburetor Kit for Johnson/Evinrude 398532 383067 382049 383052 439071 382045 3
by a Customer on July 29, 2009
(7 of 13 people found this review helpful)
Was this review helpful?
Q:
Does this fit my evinrude 2 HP "Mate"?
A:
This will work with your Evinrude as long as the year range is 1970-1990.


Q:
Does the 18-7043 kit come with the gasket for the sediment bowl? And if not, do you have it available?
A:
Yes. It comes with the gasket for the sediment bowl.


Q:
How to installing 398532 carb kit?
A:
You will want to refer to your repair manual for detailed instructions.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies