Refine Parts List
Model:
Years:

Model

Years

Engine CC

Impeller Wrench

Impeller Seal

440 JS 1977 - 1994 440 WR005 -
550 JS 1982 - 1989 550 WR002 SL002
550 SX 1990 - 1996 550 WR001 SL009
650 SX 1989 - 1996 635 WR001 SL009
650 TS 1989 - 1996 635 WR001 SL009
650 X-2 1991 - 1996 635 WR001 SL009
650JM 1991 - 1996 635 WR001 SL009
750 SS 1992 - 1997 743 WR001 SL009
750 ST 1993 - 1995 743 WR001 SL009
750 SX 1992 - 1996 743 WR001 SL009
750 SXi 1995 - 1996 743 WR001 SL009
750 SXi Pro 1995 - 2002 743 WR001 SL009
750 Xi 1993 - 1997 743 WR001 SL009
750 Xi Sport 1993 - 2000 743 WR001 SL009
750 XiR 1994 743 WR001 SL009
750 ZXi 1995 - 1997 743 WR001 SL009
750STS 1995 - 2001 743 WR001 SL009
800 SX-R 2003 - 2007 782 WR001 SL009
900 STS 1996 - 2002 891 WR001 SL009
900 STX 1996 - 2002 891 WR001 SL009
900 STX 2003 - 2006 891 WR001 SL009
900 Zxi 1996 - 2002 891 WR001 SL009
1100 STX 1997 - 1999 1071 WR001 SL009
1100 STX DI 2001 - 2003 1071 WR001 SL009
1100ZXi 1996 - 2006 1071 WR001 SL009
1200 STX-R 2002 - 2006 1176 WR001 SL009
STX-12F 2003 - Up 1199 WR001 SL007
STX-15F 2004 - Up 1498 WR001 SL009
Ultra 150 1999 - 2006 1176 WR001 SL007
Ultra 250X 2007 - Up 1498 WR001 SL009
Ultra LX 2007 - Up 1498 WR001 SL009

Model

Years

Engine CC

Impeller Wrench

Impeller Seal

Refine Parts List
Model:
Years:
Solas Impeller Seal Kawasaki
Price: $4.99
Part # SL002
No Reviews
Solas Impeller Seal Sea-Doo
Price: $4.99
(Out of stock)
Part # SL007
(Out Of Stock)
Solas Impeller Seal Kaw/Yam
Price: $4.99
Save: $1.92
(27% Off $6.91)
Part # SL009
Price: $9.99
Save: $0.60
(5% Off $10.59)
Part # WR002
No Reviews
Impeller Accessories-Solas Tool Kawasaki
Price: $7.99
(Out of stock)
Part # WR005
No Reviews
(Out Of Stock)
Alum. Impeller Seal (Solas)
Price: $11.99
Save: $3.57
(22% Off $15.56)
Part # SLA009
No Reviews
Solas Impeller Seal Yamaha
Price: $4.99
(Out of stock)
Part # SL008
No Reviews
(Out Of Stock)
Price: $7.99
Save: $3.73
(31% Off $11.72)
Part # WR001
Solas

Impeller Accessories & Installation Guide
Kawasaki Impeller Accessories & Installation Guide
  1. Remove and separate the whole jet pump from the PWC.
  2. Remove the trail cone (or cap) from the stator.
  3. Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
  4. Visually inspect thread on shaft & impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
  5. Screw in the impeller by hand; be careful of the sharp edges of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
  6. Assemble the pump and put it back on the PWC.
*This installation guide is suggested for reference only. Please refer to your service manual for procedure details.

Average Customer Review for Solas Impeller Seal Sea-Doo
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
SL007
by Denis from Candiac, Quebec on May 27, 2012
fast delivery very good
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Impeller Seal
by Michael from Ledbetter, Kentucky on September 24, 2011
Fit well and keeps every thing working well and smooth
Was this review helpful?
Average Customer Review for Solas Impeller Seal Kaw/Yam
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Great product, fast shipping
by Chad from Mustang, Oklahoma on August 12, 2014
Awesome, would highly recommend.
Was this review helpful?
Average Customer Review for WR001 - Tool To Remove Impeller - Solas
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
WR001
by Denis from Candiac, Quebec on May 27, 2012
fast delivery very good tool
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Impeller Tool
by Michael from Ledbetter, Kentucky on September 24, 2011
A must have to remove impeller to replace wear ring or to use in pto side of motor to hold or to turn over motor.
Was this review helpful?
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies