Boats for Sale
Advice
Mariner Spark Plug Wire Kits
View Large Size
Mercury Marine 84-813706A26 replacement parts
Average Customer Review for Ignition Wire Terminal - 18-5224-9 - Sierra
Average Customer Review for Sierra 18-5225 Boat Motor Spark Plug Wire Kit
Average Customer Review for Spiral Wound Spark Plug Wires - 18-5229-9-1 - Sierra
Average Customer Review for Universal Spark Plug Boot - 18-5750-9 - Sierra
Average Customer Review for Sierra 18-5752 Universal Spark Plug Boot
Q:
WILL THIS FIT MY MERCURY 75 HP 1995 ENGINE?
A:
No it will not. The OEM number is 821945A61.
Q:
Will these work on my 2004 150 hp mercury outboard carborated?
A:
We will need engine serial number in order to confirm parts for your Mercury.
Q:
Will this fit my 1985 Mercury 75hp 4cyl 2 stroke outboard. SN# 06614769?
A:
Yes it will, as long as you need the 9 inch.
Q:
I have a 1996 200 hr mercury outboard is this the correc wire?
A:
We would need to know engine serial number to match up correct part. Contact us at the number at the top of the page with that info.
Q:
I have am 1989 85hp bayliner would this fit my motor?
A:
It is meant to be matched up by the engine specs you have. If you call in with your model or serial number we can match this up for you.
Q:
Will this fit a 1996 75hp force motor?
A:
It is meant to be matched original part number. If you call in with the model or serial number of your engine, we can help you figure out if this will work for sure.
Q:
Can I use the Universal Spark Plug Boot - 18-5752 - Sierra as well, I like the newer type terminal connector vs this spring type?
A:
Yes, either spark plug boot will work. It just depends on your preference, whether you want to use the clip-on type, or the spring-type.
Q:
I have a Nissan NS30A4. Serial number 38390. Is this the proper spark plug wire kit?
A:
No this will not work with that engine. They are designed to work with BIM ignitions. We do not have the spark plug wire kit for your motor.
Q:
Would it fit 1985 blackmax 150 hp?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.
Q:
Will this work for a Mercury, 50 hp, 2 stroke, 3 cyl. outboard?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.
Q:
Would this work with an older Mercury 20 horse 200 series lightning ignition?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.
Q:
I see these fits most motors... Will it fit an 1985 75hp tower of power?
A:
Yes as there are 3 different end fittings to fit outboard motors.
Q:
Would this fit a 1976 Mercury 1150?
A:
This will not come with the boot you will need to adapt to your motor. 18-5227-1 is a direct cross reference for your motor.
Q:
Would this work on a 1978 1150 merc?
A:
These fit most outboard motors as there are 3 different end fittings to fit different motors.
Q:
Will this kit work with a 1979 Mercury 1150 outboard 115 HP motor?
A:
These fit most outboard motors as there are 3 different end fittings to fit different motors.
Q:
I have a old 1967 Mercury 500 would one of these wire kits work on it?
A:
This would not be for your motor, but we would need serial number to verify part number. Contact us at the number at the top of the page with serial number and we can look into it.
Q:
Would it fit a 1995 200HP Mariner EFI?
A:
Yes. The kit comes with a roll of wire and a three different fittings for Mercury/Mariner engines.
Q:
Will this work on a 1998 Mercury 200 EFI #0g725287?
A:
No it will not. You will need the boot/terminal kit, part number 63709A1.
Q:
I have a 1981 115 HP Mercury outboard Serial #7171333. What are the proper spark plug wires for this motor?
A:
You will need part number 18-5227-1.
Q:
Will this fit my 1985 Mercury 75hp 4cyl 2 stroke. SN# 06614796?
A:
No it will not. You will need look at spark plug wires such as part number 18-5227-1.
Q:
What plug wire kit will I need for a 1988 Mercury 100 HP ELPTO. Serial starts with OB?
A:
We cross reference engine parts by complete serial number. To assure you are getting the right wires we need the complete number.
Q:
Will this terminal work on a 1977 115 hp mercury outboard1150 and do you sell the crimping tool?
A:
Yes this will work with your outboard. We do not sell crimping tool, but you can get that at a local automotive store.
Q:
Will these fit 2001 Johnson outboard, V4, model J135PLSIF ?
A:
No this will not work with your outboard unfortunately. It is not available separately on your motor.
Q:
I have a 1980 70hp ob, three cylinder Mariner. I would like to replace the plug wires. They approximately 18" long. Do you have a set that will fit or do you make custom lengths?
A:
18-5225 is a build your own type kit. The kit comes with a roll of wire and a three different fittings for outboard engines.
Q:
How do I crimp them on??
A:
Installation is stripping wire and then installing terminal on and then crimping it with a crimp tool. You will need that.
Q:
Ok, more specific here, what style of crimp do I use??
A:
Sierra states that you can use any sort of crimp tool to crimp these terminals.
Q:
Will this work for my 1959 evinrude 50hp outboard?
A:
Yes this will work with your outboard motor.
Q:
Will this work for a Yamaha 40 HP 4 stroke F40TLR what boot?
A:
It will not. We do not have a terminal for your engine.
Q:
Would this be a good fit for a 2002 Mercury 125 4 cyl?
A:
No this will not specifically work for your motor.
Q:
Is it good for a older mercury 25 HD 25 hp?
A:
Hi Ron- The Sierra 18-5224-9 will work with the Mercury 25hp ignition wire terminal.
Q:
How does thie silver tip clip go thru the boot and clip onto the spark plug.?
A:
Installation is stripping wire and then installing terminal on and then crimping it. It should like the spark plug 18-5230-9-1 on our site. If you have further questions or need more assistance feel free to call us.
Q:
Is this boot ok for use on a 1994 yamaha 70 TLRS?
A:
It is universal in its and accepts 8mm Universal Spark plug boot. We do not have the original information to confirm your original size. Your OEM number you need is 6G1-82370-21-00.
Q:
I need spark plug wire kits for mercury optimax 225 hp 1998?
A:
According to Sierra, this is the best possible replacement that we have for your engine:
http://www.iboats.com/Wiring-Plug-Set-18-28081-Sierra/dm/view_id.1354118
Q:
Will this work on a 1974 johnson powershift 2, 135hp?
A:
No it will not. You will need 18-5750-9 and a spark plug wire kit that is 7mm such as 18-5225.
Q:
This wires wil fit to 125 force 1987?
A:
We will need to know motor model number in order to confirm spark plug wire.
Q:
Can I get a set to fit a 1979 Mercury 90 HP S/N 1936330?
A:
Spark plug wires for you engine are by length. Once you determine length determine if you a threaded end or boots on both ends.
Q:
Will these wires work on a 1998 johnson 90 spl ? model number J90TSLECM?
A:
These are universal wires and so you will need to know length you require. These are a 10" spark plug wire, 7mm cooper core wire. If you have further questions contact us at the number at the top of the page.
Q:
Boot for other end included? 90 degree both ends?
A:
These do not have a boot on both ends.
Q:
Will these fit a 73 650 2 cyl Mercury?
A:
Parts are cross referenced by the engine serial number. There is not enough information given to answer this questions.
Q:
Will these wires fit a 1971 evinrude 100hp 4 cylinder 100193A?
A:
No. The part numbers for this engine are: 0580763, 0580762 and 0580761.
Q:
Will these plug wires fit a 1974 Chrysler 105hp two stroke?
A:
We do not have the original information on that motor to confirm plug wire.
Q:
Will these fit my 1974 850 2cyl mercury?
A:
Yes, this is a standard replacement for your Mercury engine.
Q:
Would these wires be compatable to work on my Kohler 7.5 R27 generator?
A:
Unfortunately, Sierra is unable to match up any spark plug wires to a generator. Feel free to contact us at the number on the top of the screen for more assistance.
Q:
Will it go on coil properly with the straight boot end part 1998 60 hp merc 3 cyl?
A:
We cross-reference parts using the engine serial number. If you can provide the number we can make sure this is the correct wire for your engine.
Q:
Will this wire work for my 77 chrysler 25hp?
A:
If your wires are 7" long this will work.
Q:
Will this fit on 1986 v135 black max?
A:
If you wires are 7" this should work. To be sure we would need your engine serial number.
Q:
Will this work on a Wards Sea King 10 HP (1973/74)?
A:
We do not have access to Wards Sea King engine information.
Q:
Will this fit a 2003 Mercury Mariner 40hp outboard?
A:
Yes, this is a standard replacement for Mercury 40 horsepower engines.
Q:
Need a plug wire for 2000 75hp mercury 4 stroke?
A:
You first need to know length required. So get that and call us at the number at the top of the page with that and a serial number and we can take a look at what we offer.
Q:
Is this wire like it shows male on the coil side ? and will this wire fit a 150hp V6 2-stroke ?
A:
Yes you will need to just know the length you require.
Q:
Can this wire work on a 1989 force. 125 hp model 1251x8c serial serial 3980?
A:
No it will not, it typically is built right into the coil. You need OEM number 888791.
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
