Moeller Electric Sending Unit

Exactly as advertised, easy installation

I used it for my freshwater tank that is only 6 inches deep and she works amazingly. My gauge has never worked since I've had the boat until I put this sending unit on there. Definitely recommend for someone needing a new sending unit.

I replaced the sending units on a 1986 Ranger 390v with these and they were just what the doctor ordered. I followed the directions on the package and had no troubles with the replacement. The cap screws included in the package were fine threads and my tanks had co , no problems the old ones were in good shape so I just reused them. There is a new gasket in the package so its all there when you get it. I liked the fact that the new floats are long lasting plastic, my old ones were natural cork and were falling apart and saturated so I had no idea where my fuel level was, now I know. These also worked with the original fuel gage, which made for an all around pleasant experience.

works just like they said

This sending unit was as described, and fit my boat as a perfect match. (1984 Supra Beast Competion Barefoot boat). My wife and I made the change over in about one hour from start to finish. Would highly recommend.

Perfect fit and works great. Only con is the gasket. It was so thick and made of rubber that it would squirt out and leak. I ended up using my old gasket made of fiber

It was simple to install and works perfectly.

Easy install and the unit performs exactly as advertised! Very happy with this purchase!

Easy to install with good directions

Works and the instructions provided allowed me to cut the rod and set it to the length needed for my application.

Great product for the price. Fast easy purchase with quick delivery. Easily adjustable to any tank with perfect fit.

What else can I say....I'm very satisfied

This tank level sending unit dropped in as a direct replacement, even though the OEM was a different Mfg. Works great, accurate fuel level reading once again, better design than the OEM. Highly recommend, it works.

good product for the money

Worked great! Easy to adjust, made my fuel gauge accurate again.

exact fit and great service from iboats.

I used this sending unit on my 1994 Starcraft FM160C. The installation instructions were spot on and it works perfectly.

I ordered this to replace my old broken one. fast shipping and it was very easy to install. the directions were in easy to understand English. it only took about a 1/2 hour to install.

Good Product. I would recommend.

Easy to install and adjust float to proper height. I Highly recommend this product .

Just as expected

Very easy to install, came with gasket and screws.

Easy installation, dropped right in. Works great

easy to install, works great!

Easy install and worked like a charm!

I installed this on my 1990 16ft Hewes craft sea runner with a 5 inch depth fuel tank, worked perfect, the bolt holes even lined up and came with new rubber gasket and screws. thanks for the great deal and service.

Worked perfectly thanks

good product shipping and price

Actually pretty good. Fast delivery . Sender included gasket and new screws. just install it and go.

Works great just what I needed easy to install

The product description doesn't mention that the new sending unit does come with a new gasket, mounting screws and nut in the package. It lined up perfectly with my existing fuel tank. It went on an 89 Bayliner Capri 21 gallon integral fuel tank. The rod was easily measured and cut with a good pair of diagonal cutters. The instructions were clear (read them first, not second like I usually do). It is really nice to know how much fuel I have on board now. Just a note....with the boat level it will give a true reading...but if your not running on plane,it will read differently due to the movement of the float. Marcie J

every thing lined up came with new screws gasket would buy again if i had to

Installed on Moeller 13 gallon tank and the screw holes didn't line up very good two out of five are not straight up and down but tank didn't leak after install so hopefully it will be okay.

Haven't had a working fuel gauge in about 6 years. Finally I decided to figure out what the issue was and after reading forums here, I grounded the sender and it was bad. Measured my tank (12") and ordered this unit. Got it really fast (3 days) and packaging with instructions on it was printed clearly. Fit perfectly and now my fuel gauge works beautifully!! Oh and it does come with a new gasket. 1986 Invader V210 Cuddy with an OMC 5.7 V8

this product worked great since I was unable to locate an OEM sender for my 1996 starcraft 2212. tested it on the gauge before I put it in and it worked perfectly. was pretty much a drop in installation. even came with new gasket and screws.

Installed this sending unit in my 1988 SeaRay Seville. Instructions were easy to follow and I encountered no problems in installation. Fuel gauge now displaying accurately.

Very fast delivery and came a day earlier than expected. I was able to install the fuel sending unit and put it to use the very next day. Very pleased with that. Only thing I wanted to mention was the bolt pattern didn't match the sending unit I was replacing on My Bayliner boat. I was able to drill new holes in the mounting plate and use My old gasket to get it to work though. Just wanted You to know this was not a fit all replacement part.

My tank is only 6in deep so I had to move the float up and cut the rod at 4in. Instructions and legths are on the package so there is no guess work here. With a couple swipes using a hack saw it went in with no issues.

This replacement fsu works great. Anyone worried about acurateness, need not wory. I used this to replace an old sight guage w/ an electric add on. The electric part failed, however the sight gauge read 3/4 tank which I knew was right. After swapping out, my gas gauge on dash read 3/4 -perfect. This was super easy to size and install. It took like 10 mins.

works perfect...easy install, shipped fast

The instructions are easy to understand and simple to use.

easy installation and excellent quality

I purchased a gas tank sending unit. The product description, on the web, did not say that it included a gasket. So I purchased a gasket separately. When the sending unit arrived, a gasket came with it. Now I have a spare gas tank sending unit gasket. New screws that came with the sending unit did not fit the gas tank, I had to use the old screws. Other than that, everything was/is great. My order arrived very quickly.

Easy to install and set up. It's nice to have a gas gauge again.

AS EXPECTED GREAT SHOPPING EXPERIENCE GREAT PRODUCT

Picture depicts correct gauge but when shipped is completely different gauge. Good part was prompt refund and shipping label sent to return part and refund was prompt. I'll buy again from them anytime .

The product was easy to cut to the lengths and install. Bought a new gauge and installed also. I replaced a steering cable while I had the gas tank out. Just getting things back together and ready to put gas in tank.

Quality part .doing this job after taking sender out you will find screws are of a diff thread possible .so take one out before hand the guide on the package is easy to understand just read!!!!

Easy to install and functions well.

Easy to understand instructions and works perfectly

Fast shipping

Dealer installed a fuel guage in the old hour-meter hole when re-powering boat, but it didn't work. Put this sender in and life is good- don't have to guess anymore. Easy to install although clearance through hole in my tank was very tight. Once in place, tighten screws, attach two wires and go fishing.

I had problems finding the right unit for my boat, but found it @ iboats.It was easy to identify the correct unit by the pictures and received the product within 4 days after placing order.

I replaced an old Medallion unit that is no longer in production. In end all worked fine. Dan A.

I was finally able to get this thing to fit, but it suffers from either a poor design or poor installation instructions. To begin with, it doesn't look like this picture. The float-on-a-wire attaches to a vertical piece that hangs down into the tank. The installer has to cut the vertical piece to the correct length for the tank. The problem is that the float/wire piece will not hang straight down for installation. It always sticks out about 30 degrees from vertical. That makes the size of the unit too big to fit through the mounting hole in the tank. As the size of the mounting hole is determined by the bolt circle on the gauge, there is no reason they should have not seen this problem coming. I had to put an S-bend in the wire while hoping I didn't damage the unit to get it to fit.

I installed the unit and it is working fine. Thanks Iboat.

Awesome works great

The clips holding the float leave a lot to be desired. However, there are extras provided if you need them. The 12 - 24" is not made like the picture shows. You have a bracket extending down from the top of sending unit. Then you decide, using the instructions, where to mount the floating swing arm and float to that bracket. The black mount is not mounted to a plate as shown. You have to mount it to a much longer bracket. You will have to cut this bracket below where you mount the floating arm. Then you will have to cut float arm to proper length. For the floating swing arm, the instructions give you the suggested length for the depth of your tank. Wire connection to floating arm must be mounted on the bottom to work properly. Depending on where you mount the floating arm on the bracket and where you cut the floating swing arm, this will decide where and when the sending unit will read full and empty, so measure correctly and mount bracket higher or leave swing arm longer if you want to leave some type of reserve when your gauge reads empty. The parts are made of light weight aluminum that bend very easily. If you bend the swinging float arm while installing, your reading will be incorrect. If you have a deep tank and your clearance above the mounting hole in the tank can not be installed by going straight down, it would be very easy to bend. My tank was 22 inches deep and only 5-6" below the gunnel, so I had to install at an ankle and try not to bend the arm. It would be nice if iboats offered a one piece sending unit, like the one shown, in a longer depth than 12".

Im usually a little leary of universal fit products. This was easy to adapt to the size I needed. Instructions are easy to follow and clear. I would definitely recommend.

20 gal tank-15 min to install. works like a charm.

Product is great, came fast, works like a charm. It is just what I needed. This is a great store!

Great item, simple to install, and very quick turnaround

Ordered to match sender and gauge set for dual tank setup. Measured tanks and adjusted lengths to match depth of tanks. Installed, checked levels with measured amounts of fuel. Both senders read the same on the gauge. Good match. Worked good.

I received my package on time the sending unit came packaged and with instructions,the gauge was just thrown in the box , no box installation instructions. Not a good way to do business.

Our only complaint is that we purposely ordered this sending unit because picture showed a gauge with a white background and black trim which matched our existing gauges. The unit sent had a black gauge with white trim.

Great unit!!! Went right in and worked right away.

Gauge works as it should.

Fit right in with only minimal adjustment to the and a slight bend to the float arm . Works great , easy to install .

Gauge worked, Light didn't.

great product for your money

Arrived quickly. Installed trouble free. Works fine.

works good

works good!

I am restoring my 1977 Bass Boat and removed fuel tank to replace fuel lines and clean the tank. the gasket and screws on my sending unit were badly deteriorated and had to be replaced. The replacement gasket and screw set from Iboats was a high quality perfect fit. It has helped me get one step closer to completing my restoration. Thanks again Iboats!

very satisfied

Worked as described

works for different brands as well.

I purchased a gas tank sending unit. The product description, on the web, did not say that it included a gasket. So I purchased a gasket separately. When the sending unit arrived, a gasket came with it. Now I have a spare gas tank sending unit gasket. New screws that came with the sending unit did not fit the gas tank, I had to use the old screws. Other than that, everything was/is great. My order arrived very quickly.