ENDURATop
Price: $600.99
Color:
Save: $668.42
(52% Off $1,269.41)
Part # V4893UB
No Reviews
Price: $739.99
Save: $731.10
(49% Off $1,471.09)
Part # A4893UB
Price: $1,399.99
Save: $1,380.25
(49% Off $2,780.24)
Part # A4893SUB
No Reviews
Price: $1,399.99
Save: $1,380.25
(49% Off $2,780.24)
Part # A4893SB
No Reviews
Price: $739.99
Save: $731.10
(49% Off $1,471.09)
Part # A4893TB
No Reviews
Price: $629.99
Save: $651.92
(50% Off $1,281.91)
Part # S4893TB
No Reviews
Price: $629.99
Save: $651.92
(50% Off $1,281.91)
Part # S4893UB
Price: $159.99
Save: $175.69
(52% Off $335.68)
Part # SS4

Length 8' -- Width 96" -- Height 48"

Select fabric, color and optional storage boot above. Frame and hardware included.

4 Bow Round Tube Pontoon Biminis include the following:

  • High grade black nylon fittings with stainless steel assembly fasteners.
  • 7/8" heavy wall anodized round aluminum tubing.
  • Heavy nickel-plated brass snap hooks.
  • All mounting hardware (universal mounts) included.
  • Center bow adjustment straps for adjusting crown.
  • Instructions for easy installation.

  • 3 Bow Complete Bimini Top-Vinyl Top with Boot
    Vinyl Top with Boot
    Representative photo only.
    Covers vary based on your specific boat.
    3 Bow Complete Bimini Top-Vinyl Top with Boot
    Sunbrella Top with Boot
    Representative photo only.
    Covers vary based on your specific boat.
    3 Bow Complete Bimini Top-Vinyl Top with Boot
    Sunbrella Top with Stainless Steel Frame and Boot
    Representative photo only.
    Covers vary based on your specific boat.
    Stainless Steel Fittings f/4-Bow Top
    Average Customer Review for Sunbrella Top with Boot
    Full StarFull StarFull StarFull StarEmpty Star
    Based On 5 Reviews | Write Review
    Full StarFull StarFull StarFull StarEmpty Star
    Bimini
    by Robyn from MInneapolis,, Minnesota on July 13, 2017
    It looks great but came with a small 2 inch rip which was a disappointing.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    Godfrey Marine Swee er 2019 EL/ES/RE/SC Pontoon Bimini Top
    by Dominick from Townsend, Massachusetts on April 06, 2016
    Purchased by customer in Massachusetts When I input the model number of my boat, I was confident I would be sent a bimini top that would exactly replace the OEM bimini top on my boat. It actually came with its own frame that was of a lesser quality than the OEM frame, and the actual bimini top fabric did not fit my frame. With no returns allowed, I have a bimini top I can’t use. For the satisfaction of your future customers, I would recommend you indicate that the fabric is not sized to fit the OEM frame of the boat model number.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    very pleased with this product.
    by Alan from Palm Harbor, Florida on August 18, 2015
    I added this as a second Bimini to cover the front section of my 2007 Sunchaser 8524 pontoon. The quality of the parts and fabric was great. (I'm very picky when it comes to quality too) Instructions could have used a little more description regarding the difference in length of the different bows. The forward and aft bows are slightly different lengths. It took about an hour to figure out how it all pieced together. With a little help from 2 buddies holding it in position while the other drilled and screwed the fittings in, it took about 20 minutes to mount. It looks fantastic on the boat. It's flat and level and doesn't look all bowed up and goofy like some after market biminis. Very s y at 20mph. Would 100% buy this again.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Sunbrella top
    by John from Plains, Georgia on June 20, 2013
    Fits good, opted for the SS hardware which is a worthwhile upgrade. I also bought the braces for the rear. The only issue with it is some lateral movement when the top is in the stored position. Other than that one problem, it is a fantastic addition to my boat.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Boat top
    by Kenneth from Opelousas, Louisiana on July 26, 2012
    very satisfied
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Average Customer Review for Supreme Aqua Shield Top with Boot
    Full StarFull StarFull StarFull StarFull Star
    Based On 2 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    Top with boot
    by Wayne from Wauconda, Illinois on August 25, 2014
    Love this top. Very easy to assemble about 30 mins. Nice addition to my boat. Glad i spent the extra money for the stainless hardware upgrade totally worth it.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Bimini Top
    by Kenneth from Minneola, Florida on August 01, 2013
    Product is exactly as described. Appears to be quality materials and manufacturing.
    Was this review helpful?
    Average Customer Review for Stainless Steel Fittings f/4-Bow Top
    Full StarFull StarFull StarFull StarEmpty Star
    Based On 6 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    SS fittings for Bimini Top
    by Gary from Little Rock, Arkansas on July 07, 2015
    Definite YES.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    SS Upgrade
    by Wayne from Wauconda, Illinois on August 25, 2014
    Nice upgrade to the plastic fittings. Much more solid feel.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    SS is good
    by Shawn from California, Maryland on July 12, 2013
    I have a buddy with the nylon fittings and have helped him with his boat a lot. I liked the SS fittings, so I upgraded to SS fittings and base. If I had the coin, I would have upgraded to the SS frames too, but the SS fittings are a good compromise.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Bimini Top
    by Amanda from Fort Cobb, Oklahoma on June 20, 2013
    Wasn't hard to put together or install. It took a few hours of my time, probably less if you are used to using tools, and it is exactly what I needed!
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Upgrade to Stainless Steel Fittings
    by LaVere from Milan, Illinois on June 20, 2012
    Great buy. Absolutely a must if you want to keep the bimini nice for a long time or if you need to remove the top often.
    (4 of 7 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Quility
    by Alfredo from Houston, Texas on May 05, 2012
    GREAT TOP EASY TO PUT TOGETHER
    (4 of 7 people found this review helpful)
    Was this review helpful?
    5 year warranty
    White
    14 oz. per square yard
    Vinyl with Denim Backing
    Poor
    Good
    Good
    Fair
    Good
    Good
    7 year warranty
    11 colors available
    7 oz. solution-dyed Polyester, 600 denier
    100% Polyester
    Good
    Superior
    Excellent
    Good
    Excellent
    Good
    10 year limited warranty
    10 year limited warranty
    20 colors available
    9.25 oz. marine acrylic
    100% acrylic
    Excellent
    Good
    Excellent
    Excellent
    Superior
    Excellent
    This product ships in 7 business days.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Bimini Tops

    Bimini Tops are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

    A made-to-order bimini top may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts, EnduraTop Sunbrella Bimins, Striped Bimini Tops and customer requested alterations are non-returnable unless an error was made by iboats.com or by the bimini top manufacturer.

    Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.


    Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

    Because bimini tops are "made-to-order", there will be a $25-$50 fee for any bimini top order cancellation after 1 business day of purchase, as the bimini top has already gone into production.

    Warranty Policy

    30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

    Returns for Canadian Customers

    Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

    Odd-Lot/Liquidation/Special
    Special/Liquidation covers are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer. If an error was made by iboats.com or the manufacturer, the cover must be in clean and resalable condition otherwise the return will be denied.

    See our complete return policy.