Prop Hardware Parts

Once correct parts are determined, service and deliverly are great! Thanks!

Perfect, great price, bought a bunch

Gave the motor serial number and got the prop right, but the propeller nut and thrust washer did not match the spline pattern of the prop. Thanks, I'm without a boat on my vacation. And this site won't let me choose 0 stars .... you deserve negative. Go elsewhere fast!

it's just a nut, but it works.

Sorry, but I have not used it yet and do not plan to do so until spring time.

The nut was twice as tall as the stock one. the rubber engagement ring was still off the shaft when fully tightened. I had to reuse the original nut!!

This nut kit was the perfect match for propeller install. Nice to have as a spare, too.

Perfect fit for my new prop. Could have used the old one, but having a new one, especially being a lock type nut is a good idea. And now I have a spare.

New Prop Hub warrants a New Washer Nut. A minor expense for peace of mind.

Satisfied!

I got this extra nut kit to have when I drop my other one in the lake by accident!

GOOD PRODUCT....

Good

The salesman sold me this item and i did not need it but will be unable to return it because of trying to make it fit and getting it greasy, according to return policy i cant return it. Had to call another company to figure out why it did not fit on the new prop. The number customer service gave me because they could figure out what i was talking about never called me back.

Fit well and easy to order.

Always great service. Easy to order, quick delivery and great prices.

Perfect fit

the spacer worked well and delivery was quick.

I was very pleased with the service and the ability to find what I was looking for on the web site.

Threads in replacement tab was not the same as the bolt and tab being replaced.I had to drill and tap it in order to use.Worked fine after modification.

I was very happy with the service.The new tab had a different thread than my old anode.This could have been due to the old owner of the boat replacing it . The new tab had fine threads ,where as my old anode had course threads.I was able to drill it out and rethread it,thus it worked fine.I think it would be a good idea for the manufacture to include a new bolt with the replacement trim tab.

The service department was outstanding in getting the order filled and shipped out so fast............Thanks so much!

tightned 4 lbs and started to slip threads had to red lock it and still not tight to stabilize it

Fit my Yamaha 115 4 stroke perfect. Bag contains about 10 pins

What's to say, just replacement cotter pins. They fit...

I ordered cotter pins with my new prop and hub kit and when I unpacked my package, I totally forgot about the cotter pins and recycled the box, cotter pins and paper insulation in all. In the future, I would suggest that you tape smaller parts to larger boxes so dummies like me won't toss them out.

5 ***** great transaction

What can I say, they are Cotter Pins.

As advertised

It works for the job needed

Received very quickly and worked perfectly. Thanks,

Item just as described works great. Shipping was fast. Will buy from again

Bought a prop from i-boats not thinking that the thrust washer might be different to. My old one was to thick called i-boats and and customer services was great got I figured out that there was some difference in the 2 props got me the right washer and prop fit like a glove thanks i-boats for the great service.

Just the part I needed but it should have came with the prop.

Didn't know that this came with my new propeller, so now I have a spare.

prop mfg needs to include this with the prop

excellent product

Used in conjunction with a propeller.

Just like stock Mercury 12-31211A2

!

washer was fine but the old one was still in good shape

Good replacement.

I just wont to thank you all personally,for the very good service, of geting my order in a timly manner. I placed my order of a 75 hp. four blade ss.propeller thrust washer.the price was excellent, Iam very happy with my purchase.

Right part at the right price.

They advised that you should have this for the propeller for us newbies of boating. Glad they did so there was no more delay with getting back out on the water!

I would like to give positive regards on all items ordered, but as of yet I have not received them. I'm getting a bit concerned. Thanks

This item popped up as a recommended part when purchasing a prop. It's too thin compared to the OEM pin.

I have a 1967 Boston 13.4 Super Sport with a Nissan NSFA 30 H.P. Fuel Injected, Four Stroke Outboard. Upgraded to the Solas 10” x 11 Degree 3-Blade S.S. propeller from a 9.9 x 10 Degree aluminum propeller. Definite improvement in hole shot power to plane, but a noticeable slight loss in top end speed from the aluminum propeller. All in all better, easier to pull people on an inner tube. Installation was easy, did it while boat was in the water. The S.S. Solas propeller looks great, good quality and fit perfectly. Hope to have many years with this new propeller. Thank you!

iboats made a lifelong customer today.

Good right piece

I don't believe this product will hold up to its job. Too small and thin.

These are definitely not the cotter pins that fit the propeller shaft of my Honda BF20. I will look elsewhere to find them. My shop manual says to use 3mm cotter pins. That is what is in the shaft now. These pins are closer to 2mm.

Fit perfectly

Cotter pins worked great great value

Cotter pins are too small for prop bought at the same time. Had to use old cotter pin. I boats needs to match cotter pins to prop purchased!

Good quality part at a low price

Fast shipping!

The pins linked to the 10x10 prop ordered for my 30 hp Nissan did not fit. The pins were only 1? long while advertised at 1 1/8" (which would still be short. Original was 1 1/2") Would not order again.

I've used a lot of cotter pins in my life for all different kinds of applications. I have never been so impressed with the quality of craftsmanship. These are nothing like the cotter pins I am accustomed to using. After using them when replacing my propeller I ordered several more packs of them to replace all of my old cotter pins on my other projects. It slides through holes with absolutely no problem. Once through it is able to be bent to keep it, and the other objects, in place. It is hard enough to bend that you have the satisfaction in knowing that it will not straighten itself out on its own. It is easy enough to bend that you will believe that it is soft enough that it will not just break into two pieces. I'm no self-proclaimed 'cotter pin connoisseur' but I will say that in all my years of working daily with cotter pins that I have never been so pleased.

Took too long to receive my order, over 5 weeks, and it was missing parts that I was charged for.

I cannot rate this because I didn't notice it poorly mixed in with the shipping material. It was likely shipped with the propeller I ordered, but I didn't notice it and threw away the shipping material.

It's a cotter pin, but always good to have in your box of spare parts.

Runs great. We rebuild a '65 16ft Boston Whaler for fishing the bay 2 pedestal seats with a 30hp till mount motor. We wanted a stainless prop for the extra efficiency the local shops wanted $277~$320. iboats saved the day! $165.00! We're fishing all day on 3 gallons of gas, and with out the space/weight of a console the boat actually has room and is efficient. Happy customer.

The item purchased was fine and as adverised. More important was the service which was excellent. Starting with the site which was easy to shop and the follow-up information. What really impressed was that I got delivery in 5 business days to Canada, even though customs inspected the package, which would hold it up. Altogether a very good ecperience.

These pins were too small for my application. They were ordered along with a thrust washer and spacer as well as the castle nut I bought as "backup" in case I dropped a piece in the water. Even though the pins were parts of a recommended set they are definitely too small. I found the correct stainless pins for .20 cents each at a local Marine Store.

There is nothing - absolutely nothing - half so much worth doing as simply messing about in boats. -Kenneth Graham

delivered incredibly fast.

came as expected

Yes It's a nut

Received my M/M Prop Nut along with my Solas Propeller . . Shipped fast and well packaged. iboats.com are great to deal with. Thank You!!

WORKS!!

Nut works as advertised

Worked great, prop didn't fall off!

exactly what i wanted

Best prop nut ever ! Previous one was some nylon-like plastic, this one is all brass with the anti-vibration nyloc partial thread feature that makes me feel more secure knowing its got my new props back.

Just what I needed since the old one was not any good. Fit just right Thanks... Love that fast shipping

Brass lock nut worked great.

What a great nut. It is hex shaped, and made of metal. It is such a great nut. If you have a Mercury outboard, get this nut.

perfect fit

Replacing our 3 blade prop with a 13 pitch to the 4 blade prop with a 15 pitch increased our speed and let the motor run at a lower work load.

IT FITS . BRASS , SELF LOCKING

NYLock (sp?) construction makes for worry free replacement.

Parts fit perfectly and outstanding service.

Old nut may not be re-usable.

Washer works as advertised.

Worked great, nut didn't back off

My best ever prop nut has nyloc type threads but this bad boy will be backing them up on my hi-performance 18ft. pontoon with it 27 year old 25 hp 2 stroke outboard power plant. You can't be too cautious when you're captaining that kind of serious horsepower on the high seas or even on a local lake like me.

Everything I ordered came on time and just what I needed.

like

perfect

HAPPY

Nice option to have on hand new and bargain priced!.

I received the washers along with my propeller but there were no instructions on how or where to install them on the shaft. Had to contact your technical support who e-mailed me a tech document but even that was difficult to understand as the pictures were too small to see details.

One comes with new Solas prop.

Perfect item

It fit

Exactly the nut I needed to complete my prop change project.

no problems

Great product !!!

Works great

Great product and service

The product is fine other than iboats recommending to purchase the product even when the original one would work just fine! Also iboats wrote / stated that they would send an email notifying when the product was shipped!!! We never received any update on the status of the shipment.

prop fit nice and works a lot better and more rpms

This is just right to keep the prop but from backing off but I didn't need to purchase separately as there were more washers already supplied with the prop. Still a good thing to have spare parts on hand.

It does what it should, fits great.

works as intended.

no problems

Worked as designed.

The tabs were just what I ordered. However they were not needed because the Solas SS prop that I ordered came with one. I will keep it as a spare for my fishing boat and for my pontoon boat, both of which have 50 hp Mercurys on them.

No problems.

Worked great.

recieved faster than was indicated come well packaged and what i ordered.

High quality prop and replacement nut.

It woris like it should

After several emails and calls of assuring that the nut will fit my motor.....WRONG SIZE! Not even close fit! Called them and got number of company who made the nut and for me to chase around for a refund or right nut? Not worth my time, as found one nut that fits perfectly for.85 cents! I swore that I will NEVER shop at iboats unless they can make this right.

the nut worked as it should have

prop performs as expected my motor is a 90hp Mercury 4 stroke

This is now my spare, since I got one with my new propeller

great item

Fit like the OEM nut

It's a nut, what can you say.

No problem whatsoever with this product.

Great replacement for the one that has seen the test of time. Price is right too.

Fast delivery.

Exactly what I needed

i did not use the M/M prop nut because it would allow for the cotter pin. i used my original Honda nut that would allow insertion of the cotter pin. thanks, Michael Guarino cell phone 601-750-3394

excellent service

works as it says

perfect fit

Fit perfectly and is exactly as advertized.

No need to buy this when you buying prop it coms with spacer( solas prop)

This was the perfect match-up.

the prop i bought included this part. wish they would have told me. part itself is fine.

It does the job it was designed for

First time using a 4 blade prop on my bass boat. It’s a good product, it’s balanced, provides good top end speed and gets me on plane quickly. Good customer service as well. Thanks

fast service

Great product received very quickly

purchased as a extra for my 90 hp Mercury

Excellent quality.

Didn't know this came with my new propeller, so I guess I have a spare

The Solars props I purchased came with washers. These have now become spares but one can always use a spare part.

just right, works great. Good shipping and service. Will by from again.

Perfect fit. Very pleased with entire order

The washers I did not need for instilation of the prop purchesed for the old Galexxy boat. I like carring spares when out in the gulf waters.

Great washer replace one that has seen the test of time. Al lot more plyable than the old one and serves the purpose it was desinged for. iBoats price is right on.

!

Exactly what I needed

Iboats is excellent

Just as advertised

matched up perfectly to 9.9

Fits fine, looks good.

Part fit perfectly

We haven't had a chance to use them yet.We will be using them this symmer

delivered incredibly fast.

ITEM AS DESCRIBED. GREAT PRICE. QUICK SHIPPING.

Appears to be of good quality

Fits perfectly. Always good to have a spare in case one goes overboard.

Product delivered promptly, and accurately.

shipped on time. good product.

ITEM AS DESCRIBED. GREAT PRICE. QUICK SHIPPING.

Appears to be of good quality

Bought this as a spare in case I lost my original. Works just fine.

shipped on time. beautiful machinery.

Fast service. Exactly as ordered

Fit perfectly!

I cannot rate this because I didn't notice it poorly mixed in with the shipping material. It was likely shipped with the propeller I ordered, but I didn't notice it and threw away the shipping material. I understand that it is my fault however, iboats could've done a better job than just mixing it in with the packaging.

.

Ordered all hardware you suggested go with the new prop. All fit properly, very easy to assemble.

Everything fit perfectly

Spacer fit perfectly on motor recommend it to everybody

Product as described, very fast shipping.. I'm a delighted customer.

I tried the spacer and it made my motor Vibrate.

works excellent, shipment was very fast!

The new washer, prop all the other goodies arrived alot sooner than expected. All seems to be top notch quality great price. All my marine purchases from now on that I don't need like "today" will be through iboats. I can promise you that.

Went together with no problems.

Thrust washer fit perfectly exactly what I needed

Right part at the right price

Wrong Part

fits perfect and shipment was very fast!

This thrust washer fit perfectly and actually looks better than the OEM part.

Parts arrived within 3 days in good order, fit nicely

Nice piece of hardware.

Worked great on my 1996 88 spl

New in with new prop.

this nut was so new it actually cut threads off the brass while going on - OEM quality

Bought this as a spare. Works great.

GREAT service as always Thanks

This was part of a larger order that was sent to the wrong address. Calls to customer service have resulted in nothing. No follow-up, no return calls, no answers. I have been waiting for over a month. They have my money, I have nothing.

A perfect match to the original

I ordered a new prop, cotter pin, and prop nut. Only after I placed the order did it come up that the prop nut was for a 40-75 HP. If I ordered a prop for an 85 HP wouldn't common sense tell you that I needed a prop nut for an 85 HP? It doesn't say anything about being a nut for a 40-75 HP. Yea, NOT HAPPY!!!!!

Didn't realize that it was a necessary part to my prop, but worked out great!

fit the prop shaft perfectly - it's great to get parts for a 1973 Evinrude that are original manufacturer quality - well done Solas!

Great service, first time for shopping here and will return. I found more information about boats and products than I ever have at Bass Pro. Thanks for the fast shipment.

Installed new prop on my 79 evinrude 70 hp with new spacer. When tightening the prop nut, the spacer flexes and flattens a bit which I'm sure is intended to dampen vibration of the prop. I would personally recommend changing this item out any time the prop is changed out in the case that it retains it's 'flattened form' when removed. Used the boat 3 times since new prop was installed and the prop is still on and no vibrations so I reckon the spacer is doing what it's supposed to do.

seems to be compatable although it's not like the original

Works

does the job

The thrust washer #OCTW to mount Solas prop #2411-133-17 on my 40HP, 2005 Evinrude ETEC does not fit. The inside diameter of the prop hub is 2-1/4 inches but the diameter of the thrust washer you sent is 1-3/4 inches. It would be helpful if the sellers of SOLAS props would caution the buyers that the hub location is not the same as it is on standard props, and requires a special thrust washer to adapt SOLAS props. I have bought spare parts, rebuild kits, and even motors from IBOATS. This is the first mistake I have had in years of very good service from your company. Richard M. Johnson, Johnson Bros. Machine Co.

seems to be OK

Works

Just what I needed

Ni issues - popped right on

Was easy to put this new prop on and it works perfectly... Keeps the RPM lower for fuel savings (have too small of tank in boat for this size motor) and moves the boat at about 40-45 MPH. Perfect for our needs and wishes!!

this is top quality - fits my 1973 Evinrude just like manufacturer's

Fit perfectly.

smooth transaction

Installed new stainless steel prop on my '79 evinrude 70hp with this Thrust Washer. Part fit correctly and upon inspecting prior to installing, it appeared to be a well made product. Prop is still on after 3 trips to the lake so the washer is doing what it's supposed to be doing I reckon.

Good product great service

arrived in two days, right prop and was $70.00 cheaper than West Marine, and didn't need a universal adaptor for the prop

good quality brass prop nut. fits well

nice brass nut. slight drag when mating to the threads of the propeller shaft but went on o.k.

Good quality nut, you won't be disappointed.

little thicker had to wrentch it down tight to get cotter pin in.