Seasense
SeaSense Prop Wrench 1-1/16"
Price: $9.95
Save: $5.04
(33% Off $14.99)
Part # 50073716
SHIPS TODAY!* if ordered in 8 hrs 0 mins.
This item is found in the following Product Families
  • High impact plastic construction stands up to abuse and is impervious to corrosion.
  • Fits 1-1/16" prop nuts.
  • Average Customer Review for SeaSense Prop Wrench 1-1/16"
    Full StarFull StarFull StarHalf StarEmpty Star
    Based On 67 Reviews | Write Review
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Stripped first use
    by Kurt from Los Angeles, California on November 01, 2019
    My first prop change and I should have known a plastic wrench wasn't going to cut it. Nut and shaft were undamaged. I bought this to keep on the boat with a spare different pitch prop. Never got the nut off, stripped first try. Broke out a breaker bar and a socket, nut wasn't frozen or too tight. Lesson learned.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    THumbs up
    by Charles from Royal, Arkansas on October 11, 2019
    Was delivered promptly and works great.
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Great tool for getting out of a spot.
    by Michael from Nehalem, Oregon on August 31, 2018
    This is a great little tool to carry on the boat and can get you out of a sticky spot. It's light, usable with only one hand (so the other can hold the prop still), with a handle long enough to give good leverage and be easy to grip. It doesn't float, but close to it. Put a lanyard and a float on it.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Junk
    by Keith from Crown Point, Indiana on July 26, 2018
    Plastic is too soft..... Partially stripped and handle broke off removing prop nut. Wasn't even really pulling that hard.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Yes
    by Hubert from Nesbit, Mississippi on July 15, 2018
    Yes
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Great tool
    by Keith from Pass Christian, Mississippi on July 13, 2018
    The Seasense prop wrench worked great. I had no trouble removing the old prop and getting the new prop tight enough.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Prop Wrench
    by Wiley from Gibsonville, North Carolina on May 28, 2018
    Wrench arrived and looks good. Have not used yet. Found same wrench at another site for $3 less.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Works perfect, floats, doesn't bang around in a storage area
    by Jared from Canton, South Dakota on July 07, 2017
    Just what I needed for a prop change on shore or on the lake. It floats, it fits, it doesn't bang around or rust like a steel wrench. For the money why wouldn't you have one.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Handy lightweight tool to keep on board
    by Bruce from Harrisonburg, Virginia on June 14, 2017
    Worked for my prop nut, and probably heavy enough to loosen most prop nuts if they aren't corroded or frozen too badly. Bonus the back end of he wrench is fitted for a drain plug. 2 for 1 tool without adding much weight to your boat, and if it breaks the price is right to replace.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Wrench
    by William from Mooresville, Indiana on June 11, 2017
    Works good
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Big help
    by Chris from Ocean Springs, Mississippi on May 07, 2017
    Good idea to pack ages together
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    perfect
    by Chuck from Port Orchard, Washington on September 24, 2016
    fit the nut exactly and was the right length to lever it on tightly - OEM quality
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Floating prop wrench
    by Michael from Seaford, New York on August 29, 2016
    Worked well with everything
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    DOESN'T FLOAT
    by Trent from Sandwhich, Massachusetts on August 26, 2016
    How is that the floating wrench doesn't float?? Also shocked to to see SH was almost as much as wrench, but prop ordered shipped for free next day. Waited 5 more days for non-floating floating wrench. VERY DISAPPOINTED, SAVE YOUR MONEY!
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    poor material
    by John from San Francisco, California on August 23, 2016
    The threads are warn out from trying to unlock the nut the first attempt. don't recommend it at all
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    floating wrench
    by Floyd from Pierson, Florida on August 10, 2016
    Works great have not tried the floating part yet but will assume it works great
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    This is a ok product although I feel it should be built better.
    by Thomas from Osseo, Minnesota on August 01, 2016
    This product is ok in a pinch.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Not useful
    by Karen from East Syracuse, New York on August 01, 2016
    The prop wrench does not float as advertised. Does not grip prop nut and slips when you turn the wrench. Not useful at all.
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Does Not Float!
    by Richard from Terre Haute, Indiana on July 31, 2016
    As the product was named, I actually expected it to float in water. It does not!
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Nice wrench
    by Jake from Fort Wayne, Indiana on July 21, 2016
    Did the job just fine, I was able to apply the necessary torque to it and it didn't bend slip or distort. It's now stored in the boat with my spare prop for the emergency on water prop replacement. And it does float
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Perfect
    by Steven from Sewell, New Jersey on July 14, 2016
    Does the job. Since it floats, I don't have to worry about dropping it overboard. Its big enough to get some leverage but not too big for my toolbox. Good price.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Good for plastic
    by Quinton from Weeki Wachee, Florida on July 12, 2016
    I should have gotten the metal wrench. But this one works and is acceptable.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Floats but melts
    by Lisa from Raleigh, North Carolina on July 07, 2016
    Advantages of this are clear: It floats, and it should fit the prop nut it comes with. The disadvantage is more clear: the material is too soft and will warp like warm candle wax when you try to use it. I got it along with my hub assembly kit. I live in NC and yes it was hot, but it was still only spring, and not only did the nut not come loose at all, it deformed the inside of the wrench with very little force. I had to go to Home Depot and buy a metal prop wrench that did the job. Yes, that nut was on tighter than it should have been, but a wrench that melts and deforms is not worth the mold it's made from.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Prop wench
    by Ray from Detroit, Michigan on July 06, 2016
    Good
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Prop wrench
    by John from Okeechobee, Florida on June 26, 2016
    just what I required
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty Star
    Floating Prop Wrench does not float
    by Anthony from Fort Walton Beach, Florida on June 17, 2016
    The wrench works well but does not float.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    It floats in the boat
    by Dana from Plymouth, Minnesota on June 14, 2016
    This product does not float. We tested it by standing in 3 feet of water and letting go of it. It slowly sank to the bottom. Not impressed with it.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Good wrench
    by Rick from Chatfield, Minnesota on June 09, 2016
    Perfect wrench for boating
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Perfect fit
    by George from Anderson, South Carolina on June 02, 2016
    Great wrench at a reasonable price. Carry it on the boat just in case.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Prop wrench
    by Laura from Waynesboro, Georgia on May 28, 2016
    Great tool.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    did its job
    by Mark from Livonia, Michigan on May 24, 2016
    replaced my new prop with this wrench- will leave it in my boat for emergency
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Good back up wrench
    by Ronald from New Bloomfield, Missouri on May 13, 2016
    Wrench works good, fast delivery. Thanks
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    it worked
    by Thomas from Austin, Texas on April 30, 2016
    I was a bit skeptical about a floating plastic wrench. It worked fine, however,. I withheld a star because I have doubts about long term durability. Also, I never checked to see if it actually floats!
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    Worked but not the best
    by Patrick from Lathrop, California on April 24, 2016
    Got the job done bit does not fit tight on bolt will strip out easily
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Good product!
    by Eric from Martensville, Saskatchewan on October 20, 2015
    this wrench is exactly what it describes. Floats, tightens the nut down, and I've noticed that the wrench actually starts to bend once you've reached the manufacturers torque...I know because I've used this tool followed by the torque wrench and its nearly bang on.
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    Not Bad For The Price
    by Art from Big River, California on October 19, 2015
    It works for the best part but it doesn't float.
    (3 of 5 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    I like it.
    by Michael from Elbridge, New York on September 27, 2015
    Was a little hesitant because of some negative reviews. But I used it to install a prop I just got(from I boats) it fit nice and tight on the nut,it removed and installed nut perfectly. This works great. Maybe people have the nut way over torqued?
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    great tool, worked prefectly
    by David from Hugo, Minnesota on September 09, 2015
    great advice to purchase this along with a prop
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    wrench
    by Ronald from Theresa, New York on September 05, 2015
    wrong size, did not know size until I pulled the boat
    (3 of 6 people found this review helpful)
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty Star
    Does not float
    by Brent from Grove, Oklahoma on August 30, 2015
    Wrench does not float, not even for a little while. If you drop it, it's gone!
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    it worked good
    by Bradley from Meigs, Georgia on August 25, 2015
    Here quick
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Nice wrench
    by Douglas from Farmington, New Mexico on August 07, 2015
    Nice to have a dedicated wrench for the prop. This rust proof wrench will always be handy.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    works great
    by Joel from Idaho Falls, Idaho on August 05, 2015
    Works great with new prop. Makes for easy installation. It also has a slot for the drain plug on the bottom of my boat.
    (3 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    very nice wrench
    by Mark from Reese, Michigan on August 02, 2015
    would recommend to anyone
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    worked perfectly
    by John from Framingham, Massachusetts on July 28, 2015
    Very strong considering its lightweight fit the nut like a glove. Put a string through the handle, keep a boat hook handy, and you can put it down on the water!
    (3 of 5 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Good back up
    by Bart from Columbia, Tennessee on July 26, 2015
    The wrench was a nice wrench. I purchased this to use on the land and in the water for emergency but when I tightened my prop on the land the wrench wanted to strip a little so I put it in the boat for emergency. But has a great feel. Also my nut on my prop is shallow so that effected that too.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Prop Wrench
    by Mark from SAN Diego, California on July 20, 2015
    A floating prop wrench seemed like a good idea, but it is actually a floating P.O.S. I was not able to turn the nut because the plastic quickly and easily stripped. The nut was not on very tight as I was able to use a standard socket with just a little bit of pressure. Do not plan to use this unless your nut is only on finger tight.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Sinks in fresh water
    by Eric from Eustis, Florida on July 19, 2015
    My wrench is at the bottom of Lake Eustis, FL. It might float in salt water, but it went straight to the bottom in fresh water! I wish I could get a refund, but that's hard to do now...
    (4 of 5 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    strong and light
    by Pete from Butte, Montana on July 13, 2015
    nice
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    prop wrench
    by Robert from East Helena, Montana on July 08, 2015
    Junk. Don't waste your time purchasing. Not worth shipping charges to return. Experienced mechanic, I should have known better.
    (3 of 4 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Plastic Wrench Stripped on First Try
    by Wesley from Montgomory, New York on July 07, 2015
    The wrench size was correct but plastic cannot take the stress of rotation and stripped on the first try. I had to go to Sears and buy a 1 1/4" steel socket to get the propeller nut off. Interestingly, it was not hard to rotate at all which confirms my criticism that plastic wrenches are a waste of $7.50. Unfortunately, the steel prop wrench was over $30.00 and did not seem worth it for the rare occasion of replacing a prop. I would recommend just buying a steel socket to do this task. It costs around $9.00. Ironically, it is not that much more than this worthless plastic wrench. Wes
    (3 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Doesn't float but perfect fit lightweight
    by Kevin from Duluth, Georgia on July 06, 2015
    Even though the wrench didn't float, it's lightweight and worked perfectly! I'd give it a 5* if it wasn't called a "Floating Prop Wrench!"
    (3 of 5 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Works
    by Shawn from North Pole, Alaska on July 05, 2015
    Wrench works like it should.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Worked Great.
    by James from Waldo, Florida on June 26, 2015
    On time, Customer service worked with me on a shipping upgrade problem.
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Floating wrench
    by Phillip from Guttenberg, Iowa on June 26, 2015
    It works good just remember it's carbon fiber or plastic
    (2 of 4 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    One tough wrench
    by Donald from Campbell, Ohio on June 17, 2015
    At first I was very skeptical, I thought it would've very flimsy. The wrench is well built and is very durable.irs great to not have to worry about slipping off and losing the wrench.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    Wrench does not fit
    by Alan from Cincinnati, Ohio on June 14, 2015
    Do not buy this wrench because the size is not correct. It is advertised as a 1-1/16" wrench. The wrench sent to me measures as a 1-1/8" Therefore it does not work. The wrench will slip before it will loosen or tighten the prop nut
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty Star
    FLOATING PROP WRENCH
    by Donald from Auburn, New York on June 04, 2015
    USED JUST ONCE ON MERCURY 75 HP 4 STROKE PROP. THE EDGES OF THE WRENCH STARTED TO ROUND OFF.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    It worked
    by Bradley from El Cajon, California on June 01, 2015
    It worked but im not sure for how many prop changes, next one might be questionable
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Perfect
    by Mario from St-Jean-sur-Richelieu, Quebec on May 21, 2015
    The tool works great
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Prop Wrench
    by Jay from Belgrade, Montana on May 20, 2015
    Works well for a plastic wrench.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty Star
    Prop wrench
    by James from Atco, New Jersey on May 18, 2015
    I have 150 optimax motor the torque for the prop is suppose to be 80 ft lbs. there is no way I could take off or tighten with this wrench. I tried removing the nut and the wrench just slipped. At least the wrench being plastic it didn't strip the nut. I was not satisfied at all.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Worked just like it should.
    by Andie from Port Charlotte, Florida on May 06, 2015
    Worked like a wrench
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Light weight but strong
    by David from Casper, Wyoming on April 08, 2015
    Used it as soon as I received it in the mail. Worked great.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    its a wrench and it floats
    by Dennis from Egg Harbor Township, New Jersey on June 23, 2014
    fit the nut and allowed me to turn it as advertized. I managed not to drop it into the water so I never was able to tests it floating capabilities, but I am confident it would have if I had.
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty Star
    Not so much Floating
    by Johnny from Fisher Branch, Manitoba on June 21, 2011
    Good price, but tryed it in a rain barrel and it sinks like a rock!!!!
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Review for Floating Prop Wrench, 1-1/16" - Seasense
    by a Customer on March 04, 2009
    Excellent service, great products at gtreat prices! I will be back!
    (3 of 7 people found this review helpful)
    Was this review helpful?
    Q:
    Will this fit on a SUZUKI 150 HP Outboard ???
    A:
    Manufacturer confirms yes it will work with your motor.


    Q:
    Will this work for a Merc Verado 150?
    A:
    This should be the size for your motor.


    Q:
    Will this wrench work for a 2014 evinrude e tec 30 HP outboard ?
    A:
    Unfortunately since we are aftermarket we cannot match up this by specific motor. It works for a 1-1/16 prop nut.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies