Taylor Made Boat Cover Support Poles & Vent

The iBoats Experience

Boats for Sale

Browse thousands of constantly-updated listings and search by location, brand, and boat type See more...

Advice

Connect with our expansive community and tap into the knowledge base of the most dedicated boaters around. See more...

Shop Products

Browse and search for hundreds of thousands of boat parts, accessories, and supplies to suit your every need.

Taylor Made Boat Cover Support Poles & Vent

View Large Size

Taylor Made Boat Cover Support Poles & Vent

Description Customer Reviews Customer Questions & Answers Shipping

Boat Cover Support Poles

Standard adjustable support pole. 36" to 64"
3-in-1 support pole. 36" to 64"
3-in-1 support pole. 22" to 59"
Boat Vent II (cover vent for ventilation)

View Larger Photo

3-in-1 Super Support Pole (36" - 64") - Taylor Made

Super Support Pole extends from 36" to 64".

This fully adjustable support pole is 3 support poles in one! We supply a male canvas snap, a grommet tip, and a plain end cap with these Super Support Poles. So, if you have a female canvas snap or a grommet on you boat cover, you can get a support that will work with your cover. The pole is aluminum, with a durable plastic adjuster to set the correct height for your cover.

3-in-1 Super Support Pole (22" - 59") - Taylor Made

Super Support Pole extends from 22" to 59".

View Larger Photo

Boat Vent II (Support Pole not included) - Taylor Made

Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles. Sold Individually.

View Larger Photo

Adjustable Boat Cover Support Pole, 36" to 64"

Extend the life of your boat cover by preventing water from pooling on top. Our standard boat cover support pole has a non-marring tip on each end of a telescoping aluminum tube. A durable plastic knob allows for easy adjustment of height.

Average Customer Review for 3-in-1 Super Support Pole (36" - 64") - Taylor Made

Based On 3 Reviews | Write Review

Support Pole
by Jeff from Grain Valley, Missouri on October 27, 2015

Easy to use. Light weight. My only complaint is the adjustment mechanism. I would rather had the push button with holes down the pole for the adjustment. This is a screw in adjuster with plastic hardware against aluminum. Other than that another quality piece from Taylor Made.

(1 of 1 people found this review helpful)

Was this review helpful?

Taylor Made 3-1 Support Pole
by Peggy from Milford, Connecticut on October 04, 2013

We are waiting for the first heavy snow fall however, it has been great during the heavy rains.

(1 of 1 people found this review helpful)

Was this review helpful?

Review for 3-in-1 Super Support Pole (36" - 64") - Taylor Made
by a Customer on September 17, 2008

(3 of 17 people found this review helpful)

Was this review helpful?

Average Customer Review for 3-in-1 Super Support Pole (22" - 59") - Taylor Made

Based On 13 Reviews | Write Review

Issues with pole shipped, but fixed pretty quickly
by Carl from Idaho Falls, Idaho on November 08, 2019

It turned out that the pole description and picture didn't match the part number. The actual pole I received was much shorter and of a different design. Customer service refunded my money and allowed me to keep the pole. I've ordered the correct pole and it's been shipped. They have fixed the new catalog so it shows the correct poles and the part numbers. Lesson: check that the part number matches on your invoice. I had the same pole with my previous cover and it worked well for 7 years. It broke last winter when we had a big snow storm and it just got overloaded.

Was this review helpful?

3-in-1 Super Support Pole (22" - 59") - Taylor Made
by Michael from Assiniboia, Saskatchewan on October 30, 2017

nice product possible a bit more packing as shipped to Canada

(2 of 3 people found this review helpful)

Was this review helpful?

Perfect addition to canvas vent
by Stacy from Shakopee, Minnesota on September 16, 2017

Using this to hold my canvas vent as high as possible. This works great and holds strong and does not take up much space which is just what I needed.

(2 of 3 people found this review helpful)

Was this review helpful?

Adjustible canvas/cover support pole
by William from Montross, Virginia on February 14, 2017

Looks and works as described. S y and adjusts to any height.Several different fittings at top to fasten to snaps other fittings. A little difficult to operate black adjustment handle. Overall - excellent. Would buy again!

(2 of 3 people found this review helpful)

Was this review helpful?

Excellent
by Keith from Hewitt, Texas on December 29, 2016

Worked out great to keep rain from gettting in boat

(2 of 3 people found this review helpful)

Was this review helpful?

Great support pole
by James from North Branch, Minnesota on August 19, 2015

Very versatile and strong

(2 of 3 people found this review helpful)

Was this review helpful?

3 in 1 support pole
by Ken from Waverly, Nebraska on May 13, 2015

Works fine.

(2 of 3 people found this review helpful)

Was this review helpful?

3-in-1 Super Support Pole (22" - 59") - Taylor Made
by James from Dallas, Texas on May 10, 2015

Product does not fit the boat it as adverited to fit.

(2 of 3 people found this review helpful)

Was this review helpful?

good
by Michael from Peabody, Massachusetts on October 15, 2014

No problems would buy again

(3 of 4 people found this review helpful)

Was this review helpful?

Could be a little taller
by Kevin from Cooper City, Florida on May 05, 2014

For our 19 ft stingray it could use to be another 2-3 inches longer. Otherwise works good and stays on place.

(2 of 3 people found this review helpful)

Was this review helpful?

Handy support pole
by Dan from Redding, California on October 23, 2013

Good product but would be nice if the air vent that goes through the cover attached to the pole better.

(2 of 3 people found this review helpful)

Was this review helpful?

Boat cover suppoirt pole
by Jerry from Wesley Chapel, Florida on January 04, 2012

Easy to use and good quality.

(3 of 5 people found this review helpful)

Was this review helpful?

super support pole 22to59"
by Jack from Florence, Kentucky on September 28, 2011

so far so good

(2 of 3 people found this review helpful)

Was this review helpful?

Average Customer Review for Boat Vent II (Support Pole not included) - Taylor Made

Based On 20 Reviews | Write Review

Boat Vent by Taylor Made
by Russell from Cerro Gordo, Illinois on December 03, 2020

this was purchased along with a support pole, a outboard motor cover and a cover as a gift for my Dad's Pontoon boat. He indicated to me that he couldnt understand the instructions well enough to install it on his boat. He made is own and it worked better for him. In turn he gave this to me and I stalled it and I am currently using it on my deck boat with no issues. Works well.

Was this review helpful?

Vent works nicely, some installation required
by Carl from Idaho Falls, Idaho on November 08, 2019

You will have to cut a hole in your cover to install this. I had one on my old Taylor Made cover, which started ripping after 8 years. The rip started near the vent, but the vent had nothing to do with it (fabric was just weakened from 8 years of sunlight. The vent works pretty well, and never let water through.

Was this review helpful?

boat vent II
by Michael from Assiniboia, Saskatchewan on October 30, 2017

nice product possible a bit more packing as shipped to Canada

Was this review helpful?

Nice Product
by Stacy from Shakopee, Minnesota on September 16, 2017

This works really well at keeping the humidity from building up under the canvas cover. The key is to use a pole that is high enough to get the vent as high as possible. I may add a second up by the bow to get even more air flow.

Was this review helpful?

Super Idea
by Gerald from Ramsey, Minnesota on May 29, 2017

Can't wait to use this when I get a cover that will fit the boat

(0 of 1 people found this review helpful)

Was this review helpful?

Boat Cover Vent
by Ricky from Vancouver, Washington on December 10, 2016

Easy to install and easy to follow directions. I am expecting this to help keep the temperature right and the moisture from building up.

Was this review helpful?

Boat vent
by Robert from Tecumseh, Michigan on June 29, 2016

So far so good. Hope it holds up season after season.

Was this review helpful?

No more gas smell
by Rebecca from Reston, Virginia on August 25, 2015

I use a cover for trailering, and it would reek of gas fumes before I started using this. I use just one, but for better results 2 or 3 would probably be ideal.

(1 of 1 people found this review helpful)

Was this review helpful?

boat cover vent
by John from Pinawa, Manitoba on April 28, 2015

Great thanks

(0 of 1 people found this review helpful)

Was this review helpful?

Great product
by Dan from Redding, California on October 23, 2013

Would be nice it the vent attached to the support pole better.

Was this review helpful?

For those who don't know...
by David from Cincinnati, Ohio on September 19, 2012

Guys, This system works great. I was one of the people who was worried about cutting holes in my brand new boat cover as well. All you have to do is ensure you cut the holes in the proper place. This means you will have to get into the boat with the cover over top and spend a little time to place the holes before cutting anything. Once you cut the holes in the proper spots, the black vent top is placed on the end of the support pole on the outside of the cover. Then put on the middle section of the vent onto the support pole from the inside and secure it with the provided plastic nut thing which screws on and tightens it from the inside. This will eliminate any movement where the plastic vent encases the boat cover. Now all you have to do is put the poles up. Btw, I believe this item is for replacement vents which are meant to be used with poles. I wouldn't use a vent without a support pole or you will have nothing but a vent that sags and allows water to seep into the boat when it rains. This works great when used properly.

(3 of 3 people found this review helpful)

Was this review helpful?

(o:
by Judson from Cleveland, New York on September 06, 2012

EXCELLENT QUALITY .... VERY HAPPY AND PLEASED WITH PURCHASE.

Was this review helpful?

boat vent
by Shane from Crystal, North Dakota on July 19, 2012

I know that it says support pole not included, but I think the vent and pole should be sold as one unit. The vent really does'nt work well without the pole. I think it should of recommended to purchase the pole at the same time and I would have. Until I get around to buying the pole all I have is a weight in the middle of my tarp. Thank you

(0 of 1 people found this review helpful)

Was this review helpful?

boat cover
by John from Rhinelander, Wisconsin on June 29, 2012

the cover is a very durable one and the vents are going to work nice.

Was this review helpful?

Do NOT buy, it simply does not work
by Robert from Huntersville, North Carolina on March 27, 2012

I purchased this item along with a $700.00 cover and cover canopy support with nylon straps and I have spent most of my winter figuring out what went wrong. I will be returning all items for hopefully a full refund.

Was this review helpful?

Good product. Shipping Costs too high
by Richard from Fall River, Nova Scotia on November 06, 2011

Shipping far too expensive.

(1 of 2 people found this review helpful)

Was this review helpful?

Boat Vent
by Johannes from Wilmington, North Carolina on October 31, 2011

When I finally get the boat cover, I think the Boat Vent will work great.

(0 of 1 people found this review helpful)

Was this review helpful?

Just what it looks like
by Daniel from Colorado Springs, Colorado on June 06, 2011

Very easy to install, have some marine fabric glue for your ruff edges on the cover. Does what it says it will and actually vents.

(1 of 1 people found this review helpful)

Was this review helpful?

No idea if it works
by David from Windsor, Connecticut on October 22, 2009

I bought the Boat Vent II with support pole at the same time I bought a new cover for my boat. Unfortunately, the vent comes with no instructions on its use. iboat.com customer service could offer no assistance on how to install it. (very disappointing they don't understand the products they sell.) Looking at Taylor Made's web site, it looks like I'm supposed to cut a hole in my brand new cover. There's no real instructions on the site on how to do this (the video is pretty useless). I assume there would be some reinforcement installed to avoid creating tear points where the hole has been cut, but none was provided with the vent. In summary, the Boat Vent II sits on the shelf, because I'm not cutting a hole in my brand new $500 cover without any assurance that I'm not destroying it.

(25 of 28 people found this review helpful)

Was this review helpful?

Review for Boat Vent II (Support Pole not included) - Taylor Made
by a Customer on September 17, 2008

(1 of 16 people found this review helpful)

Was this review helpful?

Average Customer Review for Adjustable Boat Cover Support Pole, 36" to 64"

Based On 1 Review | Write Review

Where and how should I install the support pole?

It will depend on on your boat and your cover. If you have a female canvas snap or a grommet on your boat cover, you can get a support that will work with your cover. Where it is installed depends on location of snap or grommet where you can get the greatest run down on your boat.

Answer Question

Hi I wanted a cover along withthis pole?

To find a cover for your boat, you'll need to visit our cover finder at: http://boatcovers.iboats.com/

Answer Question

Question & Answer Guidelines

This product ships in 1 to 14 business days.

Add to Cart and enter your Postal Code to determine the shipping charges.

Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.

Taylor Made Boat Cover Support Poles & Vent

The iBoats Experience

Boats for Sale

Advice

Shop Products

OUR COMPANY

EXPLORE IBOATS

CONNECT WITH US