Propeller Acessory Hardware
All Propeller Hardware
Q:
Ordered the hustler prop for my 93 Johnson 48 spl. My current thrust washer is different size than the hub that you sent. Is this what I need?
A:
Do what is recommended by propeller manufacturer to install onto your motor. If you need guidance you can contact Turning Point.
Q:
What is the correct thrust washer for 2004 90 hp johnson bombadier?
A:
We would need to know your engine model number to verify. Contact us at the number at the top of the page with that info and we can assist you.
Q:
Will this fit my 115 mercury outboard?
A:
We will need to know the serial number and year in order to confirm.
Q:
What is the thread size?
A:
Sierra can only match it up by engine application. There are no specs on this.
Q:
I have an 88 OMC Cobra(Solas 2513-148-15 Prop) Is the correct kit? What is the difference between this and 18-3733D?
A:
This doesn't look like it will work for your motor. Contact us at the number at the top of the page with your model (3.0, 4.3, etc.) and we can verify.
Q:
Whats the difference between this and 3733D?
A:
The "D" at the end of the part number just indicates packaging. Same parts.
Q:
Will this fit a 2014 evinrude etec and a 2411-135-15 Amita 3 o?
A:
We will need to know the engine HP or model number to confirm parts and propeller. You will need to know the pitch you need as well.
Q:
Just purchased a new prop from iboats for my 200hp, 2018, Suzuki. I need a prop nut kit. Which one? Thanks.?
A:
Yes, that is the correct one.
Q:
How do i know that I have the correct spacers, and in the right order?
A:
Spacers come down to engine application. We will need to know that information to help with that.
Q:
I bought a Solas prop from you to replace the damaged viper prop. This is on a 150 hp etech A spacer is required. Can you tell me which spacer to order?
A:
Please start a chat or call in with your engine manufacturer, horse power and year information to find the correct part.
Q:
How do i replace item?
A:
Identify the OEM number and see if it cross references with this part. If you need some assistance give us a call at 1-800-914-1123.
Q:
How do i replace item #2 speedometer tube? Does it just screw into the housing?
A:
This is a prop nut for the propeller not for speedometer pitot tube. Those tubes just install on the stern of your boat with a basic hole pattern and screw it in. If further assistance is needed call us at 1-800-914-1123.
Q:
Do you have one for a 25 hp mercury?
A:
We can take a look, but we will need to know engine serial number. Let us know if you can provide that.
Q:
Will this fit a yamaha painted stainless prop?
A:
Prop hardware comes down to motor, so we will need to go off that.
Q:
Will this fit my 115 hp Mercury outboard, SN 1B995769, model 1115F13KD, 2013 mercury 115 4 stroke. If this is not the right prop nut/washer, can you provide the correct part number?
A:
Yes this will work with your application. This is for Mercury 75-300hp 2 and 4-Stroke outboards.
Q:
My new prop is a 1/4 inch to far up the prop shaft. The old prop had no spacer, does this washer make the new prop fit right or do I have the wrong prop?
A:
These tab washers are for keeping prop nut secure. These do not act as spacers or anything. You will need to contact us with your motor and prop number you have for us to look into a possible issue. Call us at the number at the top of the page.
Q:
Is fit for my Mercury 75hp 4 strokes motor?
A:
We will need to know the serial number in order to match up the part.
Q:
Sir will this work 89 Merc.25hp?
A:
We would need the serial # for your engine to find the correct part.
Q:
Do you have this made with mag for freshwater? I need it because of already purchased apollo ss prop?
A:
Depending on the make of your engine, this magnesium anode could work for you:
http://www.iboats.com/Magnesium-Trim-Tab-Anode-18-6241-Sierra/dm/view_id.172166
Q:
Will this trim tab work with a 2001 225 Mercury Optimax?
A:
We will need the serial number to confirm. Let us know if you can provide that.
Q:
I have a 4.3 litre mercruiser V6 inboard with an alpha 1 sterndrive, can you help me find the correct replacement prop nut?
A:
This will work with your Mercruiser, Alpha One outdrive.
Q:
I have a 1996 Force 120 HP outboard with the 4 1/4" Mercury gear case. Which propeller nut kit do I need?
A:
This prop nut kit is the correct one for your motor.
Q:
Will this fit a 115hp suzuki?
A:
We would need a model # to confirm correct fitment of sierra parts. However part# 17044501 from solas would be an option you could use for that engine.
Q:
What prop nut kit using solar hr titan 4 prop on a 2015 yamaha f300?
A:
You will need part number 18-3782.
Q:
What Prop Nut Kit do I need for a Yamaha 115 4 stroke?
A:
We will need to have the year and model of the engine to determine the correct kit.
Q:
Which motors will this prop nut work on?
A:
It can actually go with several Suzuki outboards. We will need your engine information so we can get OEM number to cross reference.
Q:
Can you tell me which is the correct nut KIT for my 2016 Suzuki DF200A in-line 4 cylinder, 4 stroke motor? Thanks?
A:
You will need Sierra's part number 18-3775 for your Suzuki outboard.
Q:
Will this fit a 2001 Nissan 25 hp 2 stroke itâs a 10 spline?
A:
No. This is fits a 9.8 hp engine.
Q:
Does this fit 1983 15hp 10 spline?
A:
This nut will not fit your engine. Sierra does not make a nut that will fit.
Q:
Will this fit 2016 15hp Suzuki 10 spline prop shaft?
A:
Our parts list only goes back to 2014, but as of 2014, 15 HP motors no this won't work. You need 09141-12005.
Q:
Whats the difference between this and 3733D?
A:
This is the nut and keeper only. 18-3733D is the nut and keeper, cotter pin, and spacer.
Q:
Which prop nut kit fits 2016 etc 150 hp HO?
A:
We do not list it, you will need OEM number 0434153.
Q:
I would like to order a prop wrench. Do you know the size of the nut?
A:
No there is no size listed for the prop nut. We will need to match it all up by engine application.
Q:
I have a 25 hp evenrude 4stroke 10 spline what nut do i need?
A:
It will depend on the year and model number of the engine.
Q:
Will this fit a 1995 Evinrude 90 hp E90TLEOR?
A:
No, this is not the correct kit for your motor. The prop nut that you need is part # 18-3705. The cotter pin is part # 18-3742. The spacer is part # 18-4228. Unfortunately, they do not have a kit that includes these three items.
Q:
Will this fit a 1968 johnson 28 hp outboard motor?
A:
We are not showing that Johnson made a 28 hp in 1968. Please give us the model number of your engine so we can look this up for you.
Q:
Will this fit a 1987 Johnson 28hp motor Model?
A:
No, sierra does not make a prop nut kit for that engine. You need prop nut # 390294 and cotter pin # 306394.
Q:
Will this fit my 1982 25 hp commercial evinrude motor? Thanks.....Sid Kilger?
A:
We would need a model # of your engine to confirm fitment. However part# OB-PKT, would be a kit that would work as well.
Q:
I have a 1989 Evenrude 25hp model TE25ELCEB I need a prop nut kit, but can't find the part number.?
A:
The correct kit is 18-3717.
Q:
Have a 1978 evinrude 175hp v6 model number 175849C Will this work on my motor?
A:
We don't have a breakdown of your specific model number, but this does fit a 1978 175 HP Evinrude motor so it should work.
Q:
Will this fit 15 spline?
A:
We will need to know motor to match up the prop nut kit.
This product ships in 1 to 3 business days.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies