SE Sport 300 High Performance Hydrofoil for 40-350HP Motors, Black - Sport Marine
This item is found in the following Product Families
- High Performance Hydrofoils streamlined for speed in two sizes
- The SE Sport will improve handling and provide better maneuverability with a smoother ride
- Features Turbo Trac to enhance thrust and control
- Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot
- Cuts planing time dramatically and keeps the boat on plane at lower speeds
- Features on piece, high strength copolymer construction
- Stainless steel hardware included
- Attaches to cavitation plate
- Works for both outboards and sterndrives that have a cavitation plate larger than 5 inches wide, usually 40 horse power and up.The SE Sport 200 is recommended for cavitation plates 5 inches or less.
- Many Honda outboards are made with a center cavitation plate ridge. Some Hondas will require a slight cut or bigger notch in the "yoke" area of the foil. This is necessary to give 1/2" spacing between the rear holes to be drilled and the end of the cavitation plate. Cutting a notch can easily be handled with a small saw or grinder and will not affect the durability or warranty of the SE Sport.
Q:
I don't have a problem with getting on plane but do have a problem with excess water spray. Motor is already mounted as high on transom as possible. Will SE Sport 300 help eliminate excess spray?
A:
Hydrofoil is not designed to do that. You may just get more water coming back into the boat. You will probably want to contact a technician for best results. You can look into a trim tab, but typically excessive water spray is a result of where motor is mounted.
Q:
I have a 23' Sea ray cruiser with a 5.7 L V8 and an Alpha One/Gen One sterndrive. Is the SE Sport 300 recomended for my boat and will it fit my sterndrive. Thanks, Jim?
A:
It will fit all sizes that have a cavitation plate larger than 5 inches wide, usually 40 horse power and up.
Q:
I have a 2015 - Four Winns Horizon w/ Volvo Penta IO -200 HP. Boat tends to porpoise, so I need to be trimmed down all the way. Looking to get a bit more top end speed and higher RPM's by being able to trim up a bit more. Engine is rated for 4200 - 4600 RPM. Only getting to 3800 - 3900 now. No problem planing off as it is now.Will the SE 400 help ?
A:
It sounds like you need a different size pitch, you change your pitch to adjust the RPM's. Please call in with your engine manufacturer, horse power, year and what size pitch your currently using and we can assist you find the best prop to get the performance your looking for.
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies