Boats for Sale
Advice
Bilge Pump, 900 GPH, Auto
View Larger Photos
Bilge Pump, 900 GPH, Auto
![[ imageAlt]](/mall/image/view/1/1/3040051c_2.jpg)
Designed for tight spaces, 2-1/4" height. 900 gallons per hour capacity. Threaded discharge nozzle with straight or a 90° fitting included. Tricuspid check valve included on the straight fitting to reduce backflow. Discharge body swivels up to 180° for ease of installation. Automated pump has two settings, 2" or 1.3" turn on. Third option is electronic automatic mode, where the pump checks for water every 2-1/2 minutes all in one pump.
Rule LoPro 900 series
Designed for tight spaces, 2-1/4" height. 900 gallons per hour capacity. Automated pump has two settings, 2" or 1.3" turn on. Third option is electronic automatic mode, where the pump checks for water every 2-1/2 minutes all in one pump. ... read more
Video Transcript
Nothing like a smooth sunny day out on the water until some of that water invites itself aboard your lovely boat. Of course, the bilge pumps handle the problem once the water actually reaches it.
Presenting the Rule low profile LP 900 Bilge Pumps. At just over 2 inches high and 2 inches wide, its small size means you can finally get a pumping power in much tighter spaces.
The more water you can get out of your boat, the better and the more ways to make that happen, the better. That's why we've designed the LP 900 with key features such as a rotating motor cartridge that positions the water sensors are either 2 inches or 1.3 inches above the bottom of the pump base.
Installing it where you need it most is made even easier because the discharged body swivels a full 180 degrees. While the threaded discharge nozzle gives you 4 different discharge port options and the tricuspid check valves help prevent backflow so the water the comes out stays out.
The LP 900S has two owner selectable automated modes. The first response to water level, automatically turning on the pump, when it senses 1.3 inches or 2 inches of water while the second automatically turns it on every two and a half minutes to heck for the presence of water. With the pump powering up and staying on until any water it senses has gone.
Built into the pump is an automatic feature that prevents them from running continuously whether isn't water present.
Also available is the LP 900D model offering the same spacing the design is super shallow operating options but in a non-automatic form. You can mount either model horizontally and vertically or whichever way best suits your boats’ design. And both have pump 900 gallons per hour of pumping power certain to keep your bilge shipshape.
The Rule LoPro Series Bilge Pumps, durable, powerful and with a built in design flexibility to easily install in just the right place.
Talk to your local Rule retailer about getting one today.
Video Transcript
Nothing like a smooth sunny day out on the water until some of that water invites itself aboard your lovely boat. Of course, the bilge pumps handle the problem once the water actually reaches it.
Presenting the Rule low profile LP 900 Bilge Pumps. At just over 2 inches high and 2 inches wide, its small size means you can finally get a pumping power in much tighter spaces.
The more water you can get out of your boat, the better and the more ways to make that happen, the better. That's why we've designed the LP 900 with key features such as a rotating motor cartridge that positions the water sensors are either 2 inches or 1.3 inches above the bottom of the pump base.
Installing it where you need it most is made even easier because the discharged body swivels a full 180 degrees. While the threaded discharge nozzle gives you 4 different discharge port options and the tricuspid check valves help prevent backflow so the water the comes out stays out.
The LP 900S has two owner selectable automated modes. The first response to water level, automatically turning on the pump, when it senses 1.3 inches or 2 inches of water while the second automatically turns it on every two and a half minutes to heck for the presence of water. With the pump powering up and staying on until any water it senses has gone.
Built into the pump is an automatic feature that prevents them from running continuously whether isn't water present.
Also available is the LP 900D model offering the same spacing the design is super shallow operating options but in a non-automatic form. You can mount either model horizontally and vertically or whichever way best suits your boats’ design. And both have pump 900 gallons per hour of pumping power certain to keep your bilge shipshape.
The Rule LoPro Series Bilge Pumps, durable, powerful and with a built in design flexibility to easily install in just the right place.
Talk to your local Rule retailer about getting one today.
Q:
Is there a manual mode?
A:
The LP900D is the non-automatic model for this bilge pump.
Q:
What is the OD of the discharge on this pump?
A:
The threaded discharge nozzle has multiple ports available. 3/4" straight, 3/4" right angle, 1", and 1-1/8". All are included with a purchase of this pump.
Q:
What is the width of this pump?
A:
2.3 inch width. Length is 9.35 inches and height is 2.3 inches.
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
