Refine Parts List
YEAR :

MANUFACTURER

ENGINE MODEL

YEAR

SKEGGUARD PART #

Suzuki 300 hp 4 Stroke 2009 27081
Suzuki 250, 300 hp 4 Stroke 2006-2008 27151
Suzuki 150, 175, 200, 225, 250 hp 4 Stroke 2003-2010 27151
Suzuki 150, 175, 200, 225 hp 2 Stroke 1986-2002 27151
Keelguard
Price: $114.95
Part # 27151
SHIPS TODAY!* if ordered in 5 mins.
No Reviews
Price: $99.95
Part # 27081
SHIPS TODAY!* if ordered in 5 mins.
Prevents or repairs damage to your skeg

FEATURES AND BENEFITS
  • Mirror Polished Marine Grade 316 Stainless Steel
  • Thickened lower wear tab protects against ramp dragging and is great for river running
  • Drain hole prevents against corrosion and freezing
  • Won't compromise performance
  • Do-it-yourself install in less than 10 minutes
  • Installs with as little as 2-3 inches of skeg remaining
  • Three year warranty

Easily installs! Click here for installation instructions

The new SkegGuard from Megaware KeelGuard provides the best of two worlds. It will protect and prevent damage to your motor's skeg and can also be used to repair and replace an already broken skeg.

The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The SkegGuard conforms to your lower unit to insure there is no discernable drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes, and will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

SkegGuard™
Fits:
  • SUZUKI:
    • 250, 300 hp 4 Stroke 2006-2008
    • 150, 175, 200, 225, 250 hp 4 Stroke 2003-2010
    • 150, 175, 200, 225 hp 2 Stroke 1986-2002
  • YAMAHA (Models will not fit units with curved skeg):
    • 150 hp 2 & 4 Stroke 1984-2009
    • 350 hp 4 Stroke 2009
    • 115, 130, 175, 200, 225, 250 hp 2 Stroke 1984-2002
    • 3.0L - 5.7L 1989-1993
Skegguard Skeg Protector - Keelguard
Fits:
  • EVlNRUDE/ JOHNSON:
    • 150, 175, 185, 200, 225 hp 2 Stroke 1986-2003
    • 150 hp DBX & DPL (E-Tec) 2 Stroke 2004-2010
    • 175, 200 hp DPL, DSL (E-Tec) 2 Stroke 2004-2010
    • 225, 250 hp DCX. DCZ, DPX (E- Tec) 2 Stroke 2004-2010
  • OMC COBRA: V6 & V8 Drives 1986-1994
  • SUZUKI: 300 hp 4 Stroke 2009
Average Customer Review for Megaware SkegGuard 27081 - Keelguard
Full StarFull StarFull StarFull StarFull Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
just what I needed, just as advertised.
by Lawrence from Springville, Alabama on July 24, 2016
good construction and looks great also.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Just Installed SkegGuard 27081
by Joe from New Baltimore, Michigan on June 08, 2011
I just wanted to write that I recently purchased a SkegGuard for my outdrive on my Four Winns. It was very easy to install. It took me about an hour vs. 10 minutes but I wanted to make sure that I installed it right and to make sure it wouldn't fall off after use. My outdrive was pretty weathered over the years and was in dire need of a paint job. I mounted the skeg first, marked the holes to be drilled and then drilled the holes. I made sure that I could secure the SkegGuard in place with the screws and then immediately took it off. I painted my outdrive and then reinstalled the SkegGuard after the paint dried. I just wanted to say that I couldn't get over how cool the SkegGuard looks with a newly painted outdrive. I also have a stainless prop, and that also enhances the look of the outdrive (just like the picture). The SkegGuard appears very sturdy and solid after being installed. I took my boat out for a spin and it ran very smooth and stable. I am very happy with this purchase.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Just Installed SkegGuard 27081
by Joe from New Baltimore, Michigan on June 08, 2011
I just wanted to write that I recently purchased a SkegGuard for my outdrive on my Four Winns. It was very easy to install. It took me about an hour vs. 10 minutes but I wanted to make sure that I installed it right and to make sure it wouldn't fall off after use. My outdrive was pretty weathered over the years and was in dire need of a paint job. I mounted the skeg first, marked the holes to be drilled and then drilled the holes. I made sure that I could secure the SkegGuard in place with the screws and then immediately took it off. I painted my outdrive and then reinstalled the SkegGuard after the paint dried. I just wanted to say that I couldn't get over how cool the SkegGuard looks with a newly painted outdrive. I also have a stainless prop, and that also enhances the look of the outdrive (just like the picture). The SkegGuard appears very sturdy and solid after being installed. I took my boat out for a spin and it ran very smooth and stable. I am very happy with this purchase. Joe - New Baltimore, MI
(1 of 3 people found this review helpful)
Was this review helpful?
Q:
How thick are the stainless steel side plates on the skegguard?
A:
Manufacturer confirms it is 3/16", mirror polished, 8 gauge marine grade stainless steel.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies