Universal Water Separating Fuel Filter 10 Micron- SeaSense
-
Fits and replaces Mercury 35-809097, Racor S3213, Suzuki, Honda and other universal application.
-
Yamaha different size is 6” replacement part number Yamaha #MAR-FUELF-IL-TR can use SeaSense part # 50052115
-
Screwing on a filter to the head unit is done by a male central post with a common filter canister to threads that have a size 11/16"-16 UNC to work with multiple outboard engine companies such as, but not limited to: Mercury, Yamaha, Suzuki, Honda and others such as Racor.
-
Does Not work on OMC/ Johnson/ Evinrude unless using SeaSense sku number #502905
-
The filtration media is 10 micron and manufactured from hardwood pulp.
-
Filter effectiveness for performance is increased by total content of paper medium is done by pleating a larger quantity of surface area in the container. If the medium is stretched out for an overall length of the filter media measurement around 1880 ~ 1925sq.cm the fuel must pass through an increased area of filtration.
-
It works with 2 or 4 cycle engines and will not separate oil from gas.
-
Fuel flow is approximately over 80 gallons per hour (gph) capable of supplying some of the larger horsepower outboard engine.
-
It is recommended that if you have multiple engines that one filtration kit be used on each engine.
-
Designed for suction side of outboard engine pump.
-
Do not use with diesel or inboard engines .
-
External steel shell of filter is powder coated
-
Each replacement canister are epoxy coated internally as not to contribute to rusting when exposed to water from fuel.
-
Buna-N gasket seal is used on the canister seal. For proper sealing and installation it is recommended a thin coat of oil be used when hand tightening during installation.
-
It is always a good idea to carry a spare as a replacement.
-
Leak test and visually inspect before each use.