This product has been discontinued.
Sierra
Power Trim & Tilt Motor - 18-6767-1 - Sierra
Price: $283.23
Discontinued
Save: $79.76
(21% Off $362.99)
Part # 18-6767-1
(Discontinued)
This item is found in the following Product Families
Replaces OEM part #
  • OMC 172850
  • OMC 173564
  • OMC 173596
Motor and Reservoir
For Repiar Kit use 18-6252
For: Johnson/Evinrude 1974 (115 & 135 hp), most 45 hp commercial models 1989-90, 2 cylinder applications 1984-90, 3 cylinder applications 1977-83, 4 cylinder applications 1974-77
Q:
Does it fit : 1985 Evinrude 50 hp E50BELCOB ?
A:
Yes.


Q:
How do i get the lower bolt off the mounting bracket? it seems to be behind the tilt cylinder.?
A:
First - Remove the bolt and the pin securing the cylinder. Once this is done, loosen the engine mounting bolts. Top and bottom on both sides. Don't remove them. Just loosen them to the end of the threads. Next, I used a half inch thick piece of plywood against the hull of the boat beneath the engine mount and used a thin pry bar to lift the bottom of the engine away from the boat. I then jammed another piece of plywood in the top between the engine mount and the hull to hold the engine in place. This allowed me JUST ENOUGH SPACE to get a short 7/8 socket on the bolt and remove it. I hope this helps anyone who reads this.
A:
When it comes to mechanical advice, we cannot offer any because we are not trained to do that. You will need to refer to a repair/service manual, or you can connect with thousands of boaters on our forums at https://forums.iboats.com. Or you can check out our repair/service manuals: http://www.iboats.com/Boat-Motor-Repair-Manuals/dm/view_id.1


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies